Billy Goat Aerator
4HR-$60
DAY-$80
24HR-$99
This unit completely eliminates the conventional and cumbersome center wheel and center drum designs found on other units, which are prone to wear, vibration and damage. Billy Goat’s outboard drive wheels also eliminate center wheel slip and abuse from ramp loading with the tines engaged.
Additionally, the AE401 also eliminates bulky steel weights, in favor of a simple to use water weight positioned directly over the tines for better aeration depth (full tank = 50 lbs.). The unit features the industry’s softest tine engagement and exclusive Lift N Lock disengagement for best in class comfort and productivity. After use and during transport, tilt up serviceability, removable tine stars, and Fold-n-Go handles, and easy adjust drive chains make service and transport convenient and simple.
Engine Honda
Displacement (cc) 118
Coring Tines (in) .625 x 3.5
Tines 24
Tine Pattern (in) 4.5 x 7
Weight (lbs) 242
Length (in) 57
Width (in) 29
Height (in) 52.5
Wheel Type Semi-pneumatic
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Related Products
24 Inch Brush Cutter
MIN-$60
DAY-$75
24HR-$95
Billy Goat Outback 24″Brush Cutter
Nearly Indestructible
Say good-bye to sickle mowers, hand held cutters, chainsaws, etc. Designed for abuse, the Billy Goat Outback Brush Cutter cuts a clear path through the densest brush, grass and weeds over 8 feet tall, saplings up to 1.5 inches in diameter, and other problem vegetation at the rate of 2/3 acre per hour. If the front brush card can push it over, the Outback Brush Cutter will cut it
.
Tough Enough,The Billy Goat Outback Brush Cutter is designed and thoroughly tested to withstand an unexpected encounter with almost anything without breaking the blade or throwing a belt. The Billy Goat Outback Brush Cutter has innovative skids allow for easier maneuverability from side to side and enhance tire traction over rough terrain.
Tight Quarters
The Billy Goat Outback Brush Cutter has three forward speeds plus a reverse gear make cutting your way through tough terrain and vegetation much easier
The Outback® Brush Cutter cuts it – Perfect for clearing unwanted grass, weeds, brush and saplings
Rear discharge deck – Cut debris rolls out slowly and safely after it is cut
SPECIFICATIONS
BC2402H
Engine Type Honda GXV
Model Number GXV390UTIDABG
Horsepower 13.0
Fuel Capacity 2.3 qt
Oil Capacity 1.2 qt
Engine Weight 70.5 lb
Unit Weight 278 lb
Overall Length 82.5 in (2.09 m)
Overall Width 32.0 in (0.81 m)
Overall Height 43 in (1.09 m)
Maximum Operating Slope 20o
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Stihl SH 86 C-E Shredder Vac
4HR-$35
DAY-$45
24HR-$55
Like a strong wind with an off switch, the STIHL SH 86 C-E professional shredder vac is a powerful landscaping tool – and it comes standard with the necessary parts to easily convert this shredder vac into a handheld blower. It features the same STIHL Easy2Start™ system as the SH 56 C-E, but delivers higher air volume and velocity for tackling difficult yard waste. The shredder vac/blower also features soft-grip handles and four-spring anti-vibration technology for greater comfort on the job. And as it shreds, the clippings accumulate in a secure, easy-open zippered bag for convenient emptying.
1 Gallon of mixed fuel included with rental
DISPLACEMENT 27.2 cc (1.66 cu. in.)
ENGINE POWER 0.8 kW (1.07 bhp)
WEIGHT 5.6 kg (12.3 lbs.)
FUEL CAPACITY 440 cc (14.9 oz.)
BLOWING FORCE* 15 Newtons
AVG. AIR VELOCITY** 63 m/sec. (141 mph)
MAX. AIR VELOCITY** 76 m/sec. (169 mph)
AIR VOLUME AT NOZZLE** 756 m3/h (444 cfm)
SOUND PRESSURE RATING** 70 dB(A)
BAG CAPACITY 1.5 cu. ft. = 1.2 bushel
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
5′ Brush Cutter
Description
The RCR12 Series is an economically-priced Rotary Cutter, capable of cutting 1″ diameter material and
is ideal for daily use in small lots and hobby farm grass maintenance. These cutters offer fast, clean,
dependable mowing and have been extensively tested to ensure operating safety. High blade tip
speeds assure a clean cut in a variety of field conditions. The standard stump jumper slides over stumps,
rocks and debris and safety guards protect you and your property
Surpassed rugged industry standards
All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures
specified by ANSI.
Tractor HP range 18 – 60 HP
Cat. 3 driveline with shearbolt, Shear bolt offers maximum driveline protection.
Cat. 3 driveline with 2-plate slip-clutch Slip-clutch driveline offers convenience for continual work.
Floating top link Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole
position to allow greater lift leverage for smaller tractors.
Round back design Helps discharge grass better than enclosed or partially enclosed cutters.
1 1/4″ – 10″ Cutting Height Cutting height for wide range of cutting conditions.
1/2″ x 3″ Heat-treated free swinging blades Free swinging protects from obstructions. Heat-treated
offers longer life.
Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output
shaft.
10 Gauge stump jumper Allows cutter to slide over obstructions protecting the gearbox output shaft.
High blade tip speed Ensures clean cut.
Laminated tailwheel Laminated material is long lasting in rough conditions and can’t go flat.
Heavy-duty spindle on tailwheel 1 1/4″ spindle gives the strength to protect tailwheel assembly
4HR-$99
DAY-$99
24HR-$120
THE MINIMUM RATE FOR THIS ITEM IS DAY
THE RATE OF THIS ITEM WILL BE ADDED TO TRACTOR RENTAL
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Plugr Aerator
4HR-$45
DAY-$65
24HR-$70
This compact 18″ aerator is ideal for smaller property aeration or rentals and features reciprocating cam Tines that propel the unit forward and drive cores up to 2.75″ deep. The unit can aerate up to 22,000 sq. ft. per hour, is simple to operate for homeowners, easy to steer without lifting and requires no add-on weights.
Engine Honda
Displacement (cc) 118
Tines 4
Weight (lbs) 240
Core Depth (in) Up to 2.75
Core Spacing (in) 3.63 x 6
Length (in) 57
Width (in) 24
Height (in) 40
Wheels (in) 12
Wheel Type Semi-pneumatic
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
9HP Walk Behind Blower
4HR-$55
DAY-$70
24HR-$85
Optimax
Advanced impeller and aerodynamic design produce the highest airflow in the industry
Unique split-stream air deflector moves piles of leaves farther and faster; without blow-back!
Large, square discharge chute is low to the ground for better blowing power
Scrolled housing ensures consistent, constant airflow even if partially blocked by leaves
Continuously welded all-steel impeller and housing for strength and durability you can rely on season after season
Remote discharge chute control on the handle at your fingertips
Ergonomic handle design; height adjustable with anti-vibration grip
Transport bracket for convenient tie-down during transport.
Convenient lift handle makes lifting the blower on and off the truck easier.
Optional Swivel Wheel Kit for 360° turning
Engine Honda GX270 Subaru EX27
Displacement 270cc 265cc
Fuel Capacity 1.4 Gal. 1.6 Gal.
Air Cleaner type Dual Element Dual Element
Low Oil Sensor Standard Standard
Impeller (diameter, type ) 17″, 7 blade steel, reverse angle 17″, 7 blade steel, reverse angle
Impeller depth 2.75″ 2.75″
Discharge Chute Area 25.8 sq ” 25.8 sq ”
Air Volume 2260 cfm 2260 cfm
Air Speed 153 mph 143 mph 143 mph
Integrated Front Discharge Yes Yes
Throttle Control Remote Remote
Air Flow Control Remote Remote
Dimensions
(Height, Width, Length) 43″ x 28″ x 56″ 43″ x 28″ x 58″
Tires, Front 10″ pneumatic front tire w/ tube
Tires, Rear 12″ pneumatic rear tires w/ tube
Handle Ergonomic 2-position adjustable; anti-vibration grip
Transport Bracket Yes Yes
Lift Handle Yes Yes
Housing Continuously-welded steel; 1 piece engine deck
Weight 142 lbs 140 lbs
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Stihl BG 86 Handheld Blower
MIN-$35
DAY-$45
24HR-$55
For the toughest landscaping challenges, professionals turn to one of the most powerful gasoline-powered handheld blowers, the STIHL BG 86. It features a fuel-efficient, low-emission gasoline-powered engine, and includes both flat and round nozzle attachments for better job versatility. The blower is also one of the most
comfortable to use, with a four-spring anti-vibration system, a soft-grip handle and our ElastoStart shock-absorbing starter.
1 Gallon of mixed fuel is provided with this rental
DISPLACEMENT 27.2 cc (1.66 cu. in.)
ENGINE POWER 0.8 kW (1.07 bhp)
WEIGHT 4.4 kg (9.7 Ibs.)
FUEL CAPACITY 440 cc (14.9 oz.)
BLOWING FORCE* 15 Newtons
AVG. AIR VELOCITY** Flat: 74 m/sec. (166 mph)
Round: 63 m/sec. (141 mph)
MAX. AIR VELOCITY** Flat: 85 m/sec. (190 mph)
Round: 69 m/sec. (154 mph)
AIR VOLUME AT NOZZLE** Flat: 620 m3/h (365 cfm)
Round: 755 m3/h (444 cfm)
SOUND PRESSURE RATING** 70 dB(A)
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Honda Mower
MIN-$25
DAY-$35
24HR-$45
Basic side discharge grass clipping removal with optional mulching blades
Commercial-grade Honda GCV160 4-Stroke engine delivers plenty of power and dependability
Six adjustable mowing heights from 1 in. to 3-1/2 in. for various grass lengths
Rugged 21 in. heavy-duty steel deck offers enhanced durability and deck longevity
Large 8 in. wheels with rear ball bearings for increased durability and maneuverability
Product Dimensions 24 x 24 x 18 inches
Item Weight 63 pounds
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Cable Layer
4HR-$60
DAY-$75
24HR-$95
The Model R450H provides the maneuverability and power you’ve been needing. Features GX160 5.5 HP Honda engine. Up to 65 feet per minute, depending on soil conditions
Will produce a savings of 50% to 80% on time and labor
It digs a trench from 2”-4” deep
Tricycle running gear
Very maneuverable; easy to load and unload
Rubber hood controls excavated dirt for less clean-up time
Engine GX160 5.5 HP Honda
Weight 90 Pounds
Wheels Steel w/ 9×3.50-4 pneumatic tires
Points Tungsten Carbide
Drive Double Belt Drive System w/ Hand-actuated clutching
Rate Bed Edging: 10 to 30 ft. Per Min
Trenching: 7 to 30 ft. Per Min
Depth 2”-4” deep
Overall Width 26 Inches
Overall Height 52 Inches (Operating Configuration)
42 Inches (Handle Folded)
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT