Cable Layer
4HR-$60
DAY-$75
24HR-$95
The Model R450H provides the maneuverability and power you’ve been needing. Features GX160 5.5 HP Honda engine. Up to 65 feet per minute, depending on soil conditions
Will produce a savings of 50% to 80% on time and labor
It digs a trench from 2”-4” deep
Tricycle running gear
Very maneuverable; easy to load and unload
Rubber hood controls excavated dirt for less clean-up time
Engine GX160 5.5 HP Honda
Weight 90 Pounds
Wheels Steel w/ 9×3.50-4 pneumatic tires
Points Tungsten Carbide
Drive Double Belt Drive System w/ Hand-actuated clutching
Rate Bed Edging: 10 to 30 ft. Per Min
Trenching: 7 to 30 ft. Per Min
Depth 2”-4” deep
Overall Width 26 Inches
Overall Height 52 Inches (Operating Configuration)
42 Inches (Handle Folded)
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Related Products
Stihl BR700 Blower
4HR-$40
DAY-$50
24HR-$60
The new STIHL BR 700 steps things up a notch in the STIHL blower range. This high output professional blower is the most powerful model to date. Able to clear piles of wet leaves, and reduce bottom line costs with its fuel efficient engine, it is the ideal tool to get control over tough landscaping tasks and large property maintenance. Professionals will love the adaptive design features, including an adjustable telescopic tube to accommodate users of different heights, and different applications, as well as the control handle that adjusts easily without tools to provide the most comfortable position. For further convenience, this blower comes
with a semi-automatic choke for smooth and easy starts. Designed with an optimal power-to-weight ratio the BR 700 combines power and portability so you can get the job done whenever, wherever.
1 Gallon of mixed fuel is provided with this rental
DISPLACEMENT 64.8 cc (4.0 cu. in.)
ENGINE POWER 2.8 kW (3.8 bhp)
WEIGHT 10.6 kg (23.4 lbs.)
FUEL CAPACITY 1400 cc (47.3 oz.)
BLOWING FORCE* 35 Newtons
AVG. AIR VELOCITY** 74 m/sec. (165 mph)
MAX. AIR VELOCITY** 88 m/sec. (197 mph)
AIR VOLUME AT NOZZLE** 1550 m3/h (912 cfm)
SOUND PRESSURE RATING** 75 dB(A)
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Poulan Push Walk Behind Mower
4HR-$25
DAY-$35
24HR-$45
This push walk behind mower is perfect for residential lawn maintenance and is powered by a reliable Briggs & Stratton 500 Series engine. A 21 in. stamped steel cutting deck is well-suited for most suburban yards. A 11 in. high rear wheel provides good maneuverability and works best on flat, hilly and uneven terrain.
Side discharge or mulching push mower (this unit will not accommodate a bagger).
5 positions height adjuster
7 in. front wheels with 11 in. rear wheels for extra maneuverability
2.7 HP at max RPM
21 in. Walk-Behind Gas Push Mower
Powered by a Reliable Briggs & Stratton 500 Series Engine
12-in. High Rear Easy-Rolling Wheels for Better Maneuverability
2-in-1: Mulch and Side Discharge
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Tow Behind Spike Aerator
4HR-$20
DAY-$25
24HR-$30
Tow Spike Aerator
Item weight full- 291lbs
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Stump Grinder 9HP
The Stump Cutter by MacKissic is compact and portable with a reversible handle bar for front or rear cutting.
The Stump Cutter has an operator presence handle which when released will engage the braking system and
stop the cutter head in less then 3 seconds. The frame is a uni-body construction with a kickstand that will
protect the cutter head during storage and double as a guard while in use. The engine is protected by the
front bumper which also provides a strong lifting handle and tie down for transportation.
The Stump Cutter features a patented cutter head. The cutter head is set thirty degrees
off vertical to allow for smooth cutting of the stump rather then grinding the stump. The teeth are also
off-set: straight, 25 degrees, and 45 degrees for the smoothest cutter available.
There is still easy access to the cutter head for quick sharpening or replacement.
The handle bars have a height adjustment to allow for differences in operators heights and size of the stump.
From the creators of the small stump cutter category, the new MacKissic Merry Commercial Mini Stump
Cutter continues the tradition of making stump grinding easy.
Stump Cutter action, like its big brother, the Mini’s unique operator position allows the user to see the stump
and cutter head at all times during operation. The cutter head orientation provides smooth stump removal
rivaled only by its big brother. Unlike other stump cutters that impair the operator’s view, the ability to see
the work in progress makes for faster and safer stump removal. Our product category exclusive braking
system stops the cutter head in less than three seconds
Model CPSC82HMC
Engine Honda GX240 Commercial
Engine CC’s 242
Cutter Head Patented tongue and groove system
Cutter Teeth Resharpenable carbide
Cutter Brake Stops in 3 seconds
Wheel Brake 6″ disc w/ mechanical caliper
Cutter Shaft Bearings 1-3/16″ w/ grease fitting
Tires 13″ pneumatic
Start Manual
Weight (lbs.) 305
Height 41″
Width 25″
Lenght Front 73″
Length Rear 88″
4HR-$75
DAY-$90
24HR-$125
FOR EXTENDED PERIOD RATES, PLEASE CALL OUR EQUIPMENT RENTAL DEPARTMENT
36 Inch Lawn Roller
4HR-$20
DAY-$25
24HR-$30
18″ x 36″ steel lawn roller made from sturdy 11-gauge steel. Features a 1″ full-length axle running through the entire drum. Rolled edges on each drum to prevent turf damage, grease fittings on removable bearings, spring-loaded scraper bar to keep drum clean, 2″ fill opening with expansion plug and a convertible handle for pushing or towing.
138 lbs. empty
572 lbs. water-filled.
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
5′ Brush Cutter
Description
The RCR12 Series is an economically-priced Rotary Cutter, capable of cutting 1″ diameter material and
is ideal for daily use in small lots and hobby farm grass maintenance. These cutters offer fast, clean,
dependable mowing and have been extensively tested to ensure operating safety. High blade tip
speeds assure a clean cut in a variety of field conditions. The standard stump jumper slides over stumps,
rocks and debris and safety guards protect you and your property
Surpassed rugged industry standards
All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures
specified by ANSI.
Tractor HP range 18 – 60 HP
Cat. 3 driveline with shearbolt, Shear bolt offers maximum driveline protection.
Cat. 3 driveline with 2-plate slip-clutch Slip-clutch driveline offers convenience for continual work.
Floating top link Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole
position to allow greater lift leverage for smaller tractors.
Round back design Helps discharge grass better than enclosed or partially enclosed cutters.
1 1/4″ – 10″ Cutting Height Cutting height for wide range of cutting conditions.
1/2″ x 3″ Heat-treated free swinging blades Free swinging protects from obstructions. Heat-treated
offers longer life.
Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output
shaft.
10 Gauge stump jumper Allows cutter to slide over obstructions protecting the gearbox output shaft.
High blade tip speed Ensures clean cut.
Laminated tailwheel Laminated material is long lasting in rough conditions and can’t go flat.
Heavy-duty spindle on tailwheel 1 1/4″ spindle gives the strength to protect tailwheel assembly
4HR-$99
DAY-$99
24HR-$120
THE MINIMUM RATE FOR THIS ITEM IS DAY
THE RATE OF THIS ITEM WILL BE ADDED TO TRACTOR RENTAL
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Lawn Solutions Walk Behind Aerator
MIN-$60
DAY-$80
24HR-$99
This model features a unique hydraulic drive system that provides excellent maneuverability and ease of use — no need to raise the tines to turn the machine. A wide unibody frame with 10-gauge steel construction and outboard drive wheels give this machine a low center of gravity for excellent side hill stability. Plus, it’s compact enough to get into the tightest areas and can aerate in reverse to back out. Handles fold to make transport and storage a snap. Self-cleaning tines are capable of creating plugs up to 4″ deep, depending on ground conditions.
Specifications
Aerating Depth Up to 3″ Aerating
Width 21″
Engine HONDA
Fuel Capacity 1 gallon
Ground Speed 4 mph (forward)/2.2 mph (reverse)
Height 38″ (handle folded) 46″ (handle up)
Length 48″ (handle folded) 50″ (handle up)
Weight 320 lbs. (with 1-27 lb. weight) 285 lbs. (w/out weights)
Width 31.5″
Disclaimer
All walk-behind machines comply with ANSI safety standards: B71.4 for commercial turf care equipment or
B71.8 for OPE walk-behind ground-engaging equipment.
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Classen Self-Propelled Turf Rake and Dethatcher
4HR-$55
DAY-$65
24HR-$80
Dethatch on hills and grades much easier with the fatigue-free operation of the Classen Self-Propelled Turf
Rake. Easily converts to a turf seeder, or vertical cutter. Folding handle makes it easy to transport.
• Operates forward and reverse
• Infinitely variable speed from 0 to 3.4 mph
• Makes loading and unloading on ramps a snap
• Great on hills
• Infinite speed from 0 to 3.4 mph eliminates fatigue on operator
• Folding handle for easy transportation
• 28 heat–treated flail blades with spacing of 11/16? standard adjustable up to 1–3/8?
• 5-position, single action height adjustment
• Heavy–duty, greasable bearings with cast iron housings
• Wheels have sealed bearings and semi–pneumatic tires
Dimensions 40″ H x 31.5″ W x 43.5″ L
Dimensions (handle folded) 34.5″ H x 31.5″ W x 30.5″ L
Dry Weight 215 lbs.
Engine Honda® GX160
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT