Sidewalk Edger
4HR-$35
DAY-$40
24HR-$50
The Pro Edger is user–friendly with fingertip controls and a ratchet–arm height adjustment system for fatigue–free operation and control. The Little Wonder Pro Edger is built for heavy, daily usage. Cut create crisp, distinct edges faster, and with less effort.
Available with Honda® GX120 engine
Edges up to 90 feet per minute. Get the job done quickly and more efficiently!
Largest available cast iron cutter head on the market
Dual belt drive provides extra power to the blade and reduces slippage during application.
10″ steel blade is sharpened on all four sides giving you the ability to flip the blade over and extends time between sharpening
Adjust cutting depth up to 4″
Blade shield keeps debris off the belts
Convenient controls adjust depth, belt tension, and blade engagement all from the operator’s position
Anti-vibration grip for user comfort
Four wheel design provides extra stability and eliminates the need for a curb wheel.
All wheels have steel hubs with ball bearings and full axles front and rear for smoother and easier
maneuverability
Engine Honda GX120
Handles Anti-Vibration Grips
Displacement 118cc
Cast Iron Cutter Head Fixed
Drive Belt Dual Belts Dual Belts
Edging Depth Up to 4 inches
Steel Hubbed 8″ Wheels 4
Weight (pounds) 69
Fuel Capacity 3 quart
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Related Products
Classen Tow Behind Aerator
4HR-$55
DAY-$65
24HR-$80
These heavy–duty core aerators are easily used with the average 15 hp riding mower or tractor. Whether your
aeration job is a lawn, sports field, or municipal facility, there’s a Classen tow–behind core aerator that’s just
right for you.
Lift Manual
Dimensions 34″ H x 56″ W x 62″ L
Aerating Width 42″
No. of Tines 48
Hitch Type Tow/ 3 point
Load Capacity (pounds) 780
Weight (pounds) 320
• Constructed of 1-1/2″ x 1-1/2″ solid steel (not square tubing)
• Weight tray for optional added weight
• Tine shafts operate independently for greater turning ease
• Built 1.5″ x 1.5″ solid steel (not square tubing)
• Aerate up to 4″ deep
• Hole pattern 5.25? x 7?
• Wheels rotate 90 degrees
• Available in 42″ and 52″ widths
• Flexible hitch system
• Can be mounted with 3-point mount or hitch mount
• 48RT can be pulled by a riding mower
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Billy Goat Aerator
4HR-$60
DAY-$80
24HR-$99
This unit completely eliminates the conventional and cumbersome center wheel and center drum designs found on other units, which are prone to wear, vibration and damage. Billy Goat’s outboard drive wheels also eliminate center wheel slip and abuse from ramp loading with the tines engaged.
Additionally, the AE401 also eliminates bulky steel weights, in favor of a simple to use water weight positioned directly over the tines for better aeration depth (full tank = 50 lbs.). The unit features the industry’s softest tine engagement and exclusive Lift N Lock disengagement for best in class comfort and productivity. After use and during transport, tilt up serviceability, removable tine stars, and Fold-n-Go handles, and easy adjust drive chains make service and transport convenient and simple.
Engine Honda
Displacement (cc) 118
Coring Tines (in) .625 x 3.5
Tines 24
Tine Pattern (in) 4.5 x 7
Weight (lbs) 242
Length (in) 57
Width (in) 29
Height (in) 52.5
Wheel Type Semi-pneumatic
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
26 Inch Brush Cutter
4HR-$70
DAY-$90
24HR-$105
Make quick work of under-brush, berries, saplings, bramble, vines, tall grass and small trees! The Outback® BC26 can cut saplings up to 2′ wide and brush 6′ tall – all at a rate of just under an acre of brush per hour.
The BC26 has a 26″ wide deck with higher tip speed for improved speed and cut quality. This nature-taming performer comes standard with a Tuff Torq™ hydrostatic transmission featuring fully automatic Enhanced Traction Control (ETC ), offering superior traction in wet or uneven conditions. Engineered to glide over uneven terrain, the pivoting brush deck hugs the ground for a better cut. This minimizes scalping and improves traction by keeping the weight of the machine on its drive wheels. (Honda engine version can handle up to 20-degree slopes
Ergonomically-angled plow-style handles with padded grips offer comfort and protection. Never take your hands off the machine to shift gears with conveniently located controls.
Step up to the Billy Goat Outback BC26 and dramatically improve your productivity.
SPECS
Engine Brand Honda
Displacement (cc) 390
Start Pull
Cut Width (in) 26
Cut Height (in) 3.75
Weight (lbs) 317
Length (in) 83
Width (in) 31
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Cable Layer
4HR-$60
DAY-$75
24HR-$95
The Model R450H provides the maneuverability and power you’ve been needing. Features GX160 5.5 HP Honda engine. Up to 65 feet per minute, depending on soil conditions
Will produce a savings of 50% to 80% on time and labor
It digs a trench from 2”-4” deep
Tricycle running gear
Very maneuverable; easy to load and unload
Rubber hood controls excavated dirt for less clean-up time
Engine GX160 5.5 HP Honda
Weight 90 Pounds
Wheels Steel w/ 9×3.50-4 pneumatic tires
Points Tungsten Carbide
Drive Double Belt Drive System w/ Hand-actuated clutching
Rate Bed Edging: 10 to 30 ft. Per Min
Trenching: 7 to 30 ft. Per Min
Depth 2”-4” deep
Overall Width 26 Inches
Overall Height 52 Inches (Operating Configuration)
42 Inches (Handle Folded)
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Stihl SH 86 C-E Shredder Vac
4HR-$35
DAY-$45
24HR-$55
Like a strong wind with an off switch, the STIHL SH 86 C-E professional shredder vac is a powerful landscaping tool – and it comes standard with the necessary parts to easily convert this shredder vac into a handheld blower. It features the same STIHL Easy2Start™ system as the SH 56 C-E, but delivers higher air volume and velocity for tackling difficult yard waste. The shredder vac/blower also features soft-grip handles and four-spring anti-vibration technology for greater comfort on the job. And as it shreds, the clippings accumulate in a secure, easy-open zippered bag for convenient emptying.
1 Gallon of mixed fuel included with rental
DISPLACEMENT 27.2 cc (1.66 cu. in.)
ENGINE POWER 0.8 kW (1.07 bhp)
WEIGHT 5.6 kg (12.3 lbs.)
FUEL CAPACITY 440 cc (14.9 oz.)
BLOWING FORCE* 15 Newtons
AVG. AIR VELOCITY** 63 m/sec. (141 mph)
MAX. AIR VELOCITY** 76 m/sec. (169 mph)
AIR VOLUME AT NOZZLE** 756 m3/h (444 cfm)
SOUND PRESSURE RATING** 70 dB(A)
BAG CAPACITY 1.5 cu. ft. = 1.2 bushel
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
24 Inch Brush Cutter
MIN-$60
DAY-$75
24HR-$95
Billy Goat Outback 24″Brush Cutter
Nearly Indestructible
Say good-bye to sickle mowers, hand held cutters, chainsaws, etc. Designed for abuse, the Billy Goat Outback Brush Cutter cuts a clear path through the densest brush, grass and weeds over 8 feet tall, saplings up to 1.5 inches in diameter, and other problem vegetation at the rate of 2/3 acre per hour. If the front brush card can push it over, the Outback Brush Cutter will cut it
.
Tough Enough,The Billy Goat Outback Brush Cutter is designed and thoroughly tested to withstand an unexpected encounter with almost anything without breaking the blade or throwing a belt. The Billy Goat Outback Brush Cutter has innovative skids allow for easier maneuverability from side to side and enhance tire traction over rough terrain.
Tight Quarters
The Billy Goat Outback Brush Cutter has three forward speeds plus a reverse gear make cutting your way through tough terrain and vegetation much easier
The Outback® Brush Cutter cuts it – Perfect for clearing unwanted grass, weeds, brush and saplings
Rear discharge deck – Cut debris rolls out slowly and safely after it is cut
SPECIFICATIONS
BC2402H
Engine Type Honda GXV
Model Number GXV390UTIDABG
Horsepower 13.0
Fuel Capacity 2.3 qt
Oil Capacity 1.2 qt
Engine Weight 70.5 lb
Unit Weight 278 lb
Overall Length 82.5 in (2.09 m)
Overall Width 32.0 in (0.81 m)
Overall Height 43 in (1.09 m)
Maximum Operating Slope 20o
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Stump Grinder 9HP
The Stump Cutter by MacKissic is compact and portable with a reversible handle bar for front or rear cutting.
The Stump Cutter has an operator presence handle which when released will engage the braking system and
stop the cutter head in less then 3 seconds. The frame is a uni-body construction with a kickstand that will
protect the cutter head during storage and double as a guard while in use. The engine is protected by the
front bumper which also provides a strong lifting handle and tie down for transportation.
The Stump Cutter features a patented cutter head. The cutter head is set thirty degrees
off vertical to allow for smooth cutting of the stump rather then grinding the stump. The teeth are also
off-set: straight, 25 degrees, and 45 degrees for the smoothest cutter available.
There is still easy access to the cutter head for quick sharpening or replacement.
The handle bars have a height adjustment to allow for differences in operators heights and size of the stump.
From the creators of the small stump cutter category, the new MacKissic Merry Commercial Mini Stump
Cutter continues the tradition of making stump grinding easy.
Stump Cutter action, like its big brother, the Mini’s unique operator position allows the user to see the stump
and cutter head at all times during operation. The cutter head orientation provides smooth stump removal
rivaled only by its big brother. Unlike other stump cutters that impair the operator’s view, the ability to see
the work in progress makes for faster and safer stump removal. Our product category exclusive braking
system stops the cutter head in less than three seconds
Model CPSC82HMC
Engine Honda GX240 Commercial
Engine CC’s 242
Cutter Head Patented tongue and groove system
Cutter Teeth Resharpenable carbide
Cutter Brake Stops in 3 seconds
Wheel Brake 6″ disc w/ mechanical caliper
Cutter Shaft Bearings 1-3/16″ w/ grease fitting
Tires 13″ pneumatic
Start Manual
Weight (lbs.) 305
Height 41″
Width 25″
Lenght Front 73″
Length Rear 88″
4HR-$75
DAY-$90
24HR-$125
FOR EXTENDED PERIOD RATES, PLEASE CALL OUR EQUIPMENT RENTAL DEPARTMENT
Zero-Turn Riding Mower
4HR-$125
DAY-$125
24HR-$160
Ariens
Zoom 42 in. 19 HP Kohler V Twin Zero-Turn Riding Mower
Well-suited to cut and maintain small to medium-sized yards
Comfortably cut with the foot lever system and high-back seat
Steel frame and durable tires offer stability while you work
The Ariens Zoom 42 is a compact rider that is full of confidence. Combining comfort, convenience and capabilities, the Ariens Zoom 42 is fully equipped to manicure small to medium-sized yards with ease. An effortless foot lever system and premium high-back seat allow you to cut with convenience and comfort. 19 HP Kohler 6000 series twin-cylinder engine offers powerful performance 12-Gauge, stamped-steel deck with 3 maintenance free spindles is engineered for maximum airflow and exceptional cutting performance 42 in. cutting width mows more grass in fewer passes. Twin EZT hydrostatic transaxles designed to deliver responsive, smooth, effortless control. Foot operated deck lift to adjust the height of cut from 1.5 in. to 4.5 in. 18 in. in tall high back seat for maximum riding comfort. 4-point professional deck hanging system provides a stable ride and consistent cutting performance
Dimensions
Assembled Depth (in.)
64 in
Assembled Height (in.)
43 in
Assembled Width (in.)
54 in
Cutting Width
42 inches
Front Wheel Size (in.)
11
Mower Deck Width
42 in
Rear Wheel Size (in.)
18
Turning Radius (in.)
0
Commercial / Residential Residential
Cutting Options Bag,Mulch,Side-Discharge
Deck Material 12 Gauge Steel
Deck Type Stamped
Drive Type Rear-wheel Drive
Engine Displacement (cc) 660
Engine Make Kohler
Engine Torque (ft.-lb.) 27.7
Features Keyed start,Mulching Lawn Mower,Zero-Turn Capable
Fuel Tank Capacity (gallons) 2
Horsepower (hp) 19 hp
Maximum Cutting Height (in.) 4.5
Maximum Forward Speed (mph) 6
Maximum Reverse Speed (mph) 3
Minimum Cutting Height (in.) 1.5
Mower Size Small
Number of Blades 3
Number of Cylinders V-Twin
Number of Deck Wheels 4
Power Type Gas
Product Weight (lb.) 440 lb
Size of Yard 1/2 – 2 Acres
Start Type Electric
Terrain Type Flat with Obstacles
Transmission Type Hydrostatic
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT