Classen Split Drive Aerator
MIN-$60
DAY-$80
24HR-$99
The only aerator with power steering.
• Simple controls allow you to aerate straight, follow curves and turn left or right
• Combination throttle and belt tightener for a smooth start every time
• Side bumpers prevent catching on obstacles and tire scrapes ensure consistent tine depth
• Removable weights and fillable water drum for greater tine penetration in tough soil
•Effortless end-of-row turning, aerate in tight circular areas and easily maneuver around trees, hydrants and other above ground obstacles.
• Combination throttle and belt tightener for a smooth start every time
• Protective chain guards help keep grass, leaves and cores out of chains and sprockets
Dry Weight 370 lbs.
Aerating Width 24.375″
Coverage 29,000 sq. ft. per hour
Core Depth Up to 2.75″
Tines 36 36
Hole Pattern 4.06″ x 7″ 4.06″ x 7″
Weight Bar Removable 50 lb. weight bar
Drum 9.5 gal. front poly drum
Engine Honda® GX120
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Related Products
7HP Walk Behind Blower
4HR-$35
DAY-$40
24HR-$45
Moves Air At 185 MPH & 1850 CFM
Clears away leaves & yard waste in no time
Much faster & easier on your back than raking
15 Inch Diameter Poly Impeller
Powerful & light weight; balanced for smooth operation
Adjustable Deflector With Kickable Handle
Divert air up, down, forward or sideways without bending over
Sturdy 3-Wheel Frame
Easy to manuever on any terrain
Adjustable loop handle with cushioned anti-vibration grip
9-Inch Pneumatic Front-Locking Swivel Wheel
2 height adjustments put the air right where it’s needed
12-inch pneumatic rear wheels provide stability & traction
Axle gussets for extra stability
Specifications
Engine
Engine Brand Briggs & Stratton
Starting System Recoil Start
Engine Cycle 4-Cycle
CC 250 CCs
Impeller
Impeller Material Composite
Impeller Size 15 Inches
Blower
Volume of Air 1850 CFM
Air Speed 185 mph
Wheels
Front Tire Size 9 Inch
Rear Tire Size 12 Inch
Tire Type Pneumatic Wheels
Overview
Weight 135 Pounds
FOR ADDITIONAL RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Plugr Aerator
4HR-$45
DAY-$65
24HR-$70
This compact 18″ aerator is ideal for smaller property aeration or rentals and features reciprocating cam Tines that propel the unit forward and drive cores up to 2.75″ deep. The unit can aerate up to 22,000 sq. ft. per hour, is simple to operate for homeowners, easy to steer without lifting and requires no add-on weights.
Engine Honda
Displacement (cc) 118
Tines 4
Weight (lbs) 240
Core Depth (in) Up to 2.75
Core Spacing (in) 3.63 x 6
Length (in) 57
Width (in) 24
Height (in) 40
Wheels (in) 12
Wheel Type Semi-pneumatic
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Classen Self-Propelled Turf Rake and Dethatcher
4HR-$55
DAY-$65
24HR-$80
Dethatch on hills and grades much easier with the fatigue-free operation of the Classen Self-Propelled Turf
Rake. Easily converts to a turf seeder, or vertical cutter. Folding handle makes it easy to transport.
• Operates forward and reverse
• Infinitely variable speed from 0 to 3.4 mph
• Makes loading and unloading on ramps a snap
• Great on hills
• Infinite speed from 0 to 3.4 mph eliminates fatigue on operator
• Folding handle for easy transportation
• 28 heat–treated flail blades with spacing of 11/16? standard adjustable up to 1–3/8?
• 5-position, single action height adjustment
• Heavy–duty, greasable bearings with cast iron housings
• Wheels have sealed bearings and semi–pneumatic tires
Dimensions 40″ H x 31.5″ W x 43.5″ L
Dimensions (handle folded) 34.5″ H x 31.5″ W x 30.5″ L
Dry Weight 215 lbs.
Engine Honda® GX160
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Stump Grinder 9HP
The Stump Cutter by MacKissic is compact and portable with a reversible handle bar for front or rear cutting.
The Stump Cutter has an operator presence handle which when released will engage the braking system and
stop the cutter head in less then 3 seconds. The frame is a uni-body construction with a kickstand that will
protect the cutter head during storage and double as a guard while in use. The engine is protected by the
front bumper which also provides a strong lifting handle and tie down for transportation.
The Stump Cutter features a patented cutter head. The cutter head is set thirty degrees
off vertical to allow for smooth cutting of the stump rather then grinding the stump. The teeth are also
off-set: straight, 25 degrees, and 45 degrees for the smoothest cutter available.
There is still easy access to the cutter head for quick sharpening or replacement.
The handle bars have a height adjustment to allow for differences in operators heights and size of the stump.
From the creators of the small stump cutter category, the new MacKissic Merry Commercial Mini Stump
Cutter continues the tradition of making stump grinding easy.
Stump Cutter action, like its big brother, the Mini’s unique operator position allows the user to see the stump
and cutter head at all times during operation. The cutter head orientation provides smooth stump removal
rivaled only by its big brother. Unlike other stump cutters that impair the operator’s view, the ability to see
the work in progress makes for faster and safer stump removal. Our product category exclusive braking
system stops the cutter head in less than three seconds
Model CPSC82HMC
Engine Honda GX240 Commercial
Engine CC’s 242
Cutter Head Patented tongue and groove system
Cutter Teeth Resharpenable carbide
Cutter Brake Stops in 3 seconds
Wheel Brake 6″ disc w/ mechanical caliper
Cutter Shaft Bearings 1-3/16″ w/ grease fitting
Tires 13″ pneumatic
Start Manual
Weight (lbs.) 305
Height 41″
Width 25″
Lenght Front 73″
Length Rear 88″
4HR-$75
DAY-$90
24HR-$125
FOR EXTENDED PERIOD RATES, PLEASE CALL OUR EQUIPMENT RENTAL DEPARTMENT
36 Inch Lawn Roller
4HR-$20
DAY-$25
24HR-$30
18″ x 36″ steel lawn roller made from sturdy 11-gauge steel. Features a 1″ full-length axle running through the entire drum. Rolled edges on each drum to prevent turf damage, grease fittings on removable bearings, spring-loaded scraper bar to keep drum clean, 2″ fill opening with expansion plug and a convertible handle for pushing or towing.
138 lbs. empty
572 lbs. water-filled.
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Classen Tow Behind Aerator
4HR-$55
DAY-$65
24HR-$80
These heavy–duty core aerators are easily used with the average 15 hp riding mower or tractor. Whether your
aeration job is a lawn, sports field, or municipal facility, there’s a Classen tow–behind core aerator that’s just
right for you.
Lift Manual
Dimensions 34″ H x 56″ W x 62″ L
Aerating Width 42″
No. of Tines 48
Hitch Type Tow/ 3 point
Load Capacity (pounds) 780
Weight (pounds) 320
• Constructed of 1-1/2″ x 1-1/2″ solid steel (not square tubing)
• Weight tray for optional added weight
• Tine shafts operate independently for greater turning ease
• Built 1.5″ x 1.5″ solid steel (not square tubing)
• Aerate up to 4″ deep
• Hole pattern 5.25? x 7?
• Wheels rotate 90 degrees
• Available in 42″ and 52″ widths
• Flexible hitch system
• Can be mounted with 3-point mount or hitch mount
• 48RT can be pulled by a riding mower
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Tow Behind Spike Aerator
4HR-$20
DAY-$25
24HR-$30
Tow Spike Aerator
Item weight full- 291lbs
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
5′ Brush Cutter
Description
The RCR12 Series is an economically-priced Rotary Cutter, capable of cutting 1″ diameter material and
is ideal for daily use in small lots and hobby farm grass maintenance. These cutters offer fast, clean,
dependable mowing and have been extensively tested to ensure operating safety. High blade tip
speeds assure a clean cut in a variety of field conditions. The standard stump jumper slides over stumps,
rocks and debris and safety guards protect you and your property
Surpassed rugged industry standards
All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures
specified by ANSI.
Tractor HP range 18 – 60 HP
Cat. 3 driveline with shearbolt, Shear bolt offers maximum driveline protection.
Cat. 3 driveline with 2-plate slip-clutch Slip-clutch driveline offers convenience for continual work.
Floating top link Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole
position to allow greater lift leverage for smaller tractors.
Round back design Helps discharge grass better than enclosed or partially enclosed cutters.
1 1/4″ – 10″ Cutting Height Cutting height for wide range of cutting conditions.
1/2″ x 3″ Heat-treated free swinging blades Free swinging protects from obstructions. Heat-treated
offers longer life.
Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output
shaft.
10 Gauge stump jumper Allows cutter to slide over obstructions protecting the gearbox output shaft.
High blade tip speed Ensures clean cut.
Laminated tailwheel Laminated material is long lasting in rough conditions and can’t go flat.
Heavy-duty spindle on tailwheel 1 1/4″ spindle gives the strength to protect tailwheel assembly
4HR-$99
DAY-$99
24HR-$120
THE MINIMUM RATE FOR THIS ITEM IS DAY
THE RATE OF THIS ITEM WILL BE ADDED TO TRACTOR RENTAL
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT