Bed Edger
4HR-$60
DAY-$75
24HR-$95
Model F791H BedEdger
The Model F791H provides the maneuverability and power you’ve been needing. Features Honda Engines and steerable wheels.
Engine Honda Commercial
Weight 170 lbs/77Kg
Wheels Steel with Pneumatic Tires
Points Tungsten Carbide
Drive Double Belt and Pulley System
Rate Bed Edging: 10 to 30 ft. Per Min
Depth 2 to 4 Inches*
Width 1/2 to 9 Inches*
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Related Products
7HP Walk Behind Blower
4HR-$35
DAY-$40
24HR-$45
Moves Air At 185 MPH & 1850 CFM
Clears away leaves & yard waste in no time
Much faster & easier on your back than raking
15 Inch Diameter Poly Impeller
Powerful & light weight; balanced for smooth operation
Adjustable Deflector With Kickable Handle
Divert air up, down, forward or sideways without bending over
Sturdy 3-Wheel Frame
Easy to manuever on any terrain
Adjustable loop handle with cushioned anti-vibration grip
9-Inch Pneumatic Front-Locking Swivel Wheel
2 height adjustments put the air right where it’s needed
12-inch pneumatic rear wheels provide stability & traction
Axle gussets for extra stability
Specifications
Engine
Engine Brand Briggs & Stratton
Starting System Recoil Start
Engine Cycle 4-Cycle
CC 250 CCs
Impeller
Impeller Material Composite
Impeller Size 15 Inches
Blower
Volume of Air 1850 CFM
Air Speed 185 mph
Wheels
Front Tire Size 9 Inch
Rear Tire Size 12 Inch
Tire Type Pneumatic Wheels
Overview
Weight 135 Pounds
FOR ADDITIONAL RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
BlueBird Tow Behind Aerator
4HR-$45
DAY-$55
24HR-$65
TA12 Towable Aerator
The TA12 has an aerating width of 48IN to give you the extra capability to handle just about any situation.
Two independent tine rotors with 40 interchangeable closed spoon 1/2IN tines provide superior maneuverability around corners and tight areas. Six optional weight containers ensure optimal soil penetration
Tip wheels allow the TA10 to easily pass through narrow openings.
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Stump Grinder 9HP
The Stump Cutter by MacKissic is compact and portable with a reversible handle bar for front or rear cutting.
The Stump Cutter has an operator presence handle which when released will engage the braking system and
stop the cutter head in less then 3 seconds. The frame is a uni-body construction with a kickstand that will
protect the cutter head during storage and double as a guard while in use. The engine is protected by the
front bumper which also provides a strong lifting handle and tie down for transportation.
The Stump Cutter features a patented cutter head. The cutter head is set thirty degrees
off vertical to allow for smooth cutting of the stump rather then grinding the stump. The teeth are also
off-set: straight, 25 degrees, and 45 degrees for the smoothest cutter available.
There is still easy access to the cutter head for quick sharpening or replacement.
The handle bars have a height adjustment to allow for differences in operators heights and size of the stump.
From the creators of the small stump cutter category, the new MacKissic Merry Commercial Mini Stump
Cutter continues the tradition of making stump grinding easy.
Stump Cutter action, like its big brother, the Mini’s unique operator position allows the user to see the stump
and cutter head at all times during operation. The cutter head orientation provides smooth stump removal
rivaled only by its big brother. Unlike other stump cutters that impair the operator’s view, the ability to see
the work in progress makes for faster and safer stump removal. Our product category exclusive braking
system stops the cutter head in less than three seconds
Model CPSC82HMC
Engine Honda GX240 Commercial
Engine CC’s 242
Cutter Head Patented tongue and groove system
Cutter Teeth Resharpenable carbide
Cutter Brake Stops in 3 seconds
Wheel Brake 6″ disc w/ mechanical caliper
Cutter Shaft Bearings 1-3/16″ w/ grease fitting
Tires 13″ pneumatic
Start Manual
Weight (lbs.) 305
Height 41″
Width 25″
Lenght Front 73″
Length Rear 88″
4HR-$75
DAY-$90
24HR-$125
FOR EXTENDED PERIOD RATES, PLEASE CALL OUR EQUIPMENT RENTAL DEPARTMENT
Classen Self-Propelled Turf Rake and Dethatcher
4HR-$55
DAY-$65
24HR-$80
Dethatch on hills and grades much easier with the fatigue-free operation of the Classen Self-Propelled Turf
Rake. Easily converts to a turf seeder, or vertical cutter. Folding handle makes it easy to transport.
• Operates forward and reverse
• Infinitely variable speed from 0 to 3.4 mph
• Makes loading and unloading on ramps a snap
• Great on hills
• Infinite speed from 0 to 3.4 mph eliminates fatigue on operator
• Folding handle for easy transportation
• 28 heat–treated flail blades with spacing of 11/16? standard adjustable up to 1–3/8?
• 5-position, single action height adjustment
• Heavy–duty, greasable bearings with cast iron housings
• Wheels have sealed bearings and semi–pneumatic tires
Dimensions 40″ H x 31.5″ W x 43.5″ L
Dimensions (handle folded) 34.5″ H x 31.5″ W x 30.5″ L
Dry Weight 215 lbs.
Engine Honda® GX160
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Cable Layer
4HR-$60
DAY-$75
24HR-$95
The Model R450H provides the maneuverability and power you’ve been needing. Features GX160 5.5 HP Honda engine. Up to 65 feet per minute, depending on soil conditions
Will produce a savings of 50% to 80% on time and labor
It digs a trench from 2”-4” deep
Tricycle running gear
Very maneuverable; easy to load and unload
Rubber hood controls excavated dirt for less clean-up time
Engine GX160 5.5 HP Honda
Weight 90 Pounds
Wheels Steel w/ 9×3.50-4 pneumatic tires
Points Tungsten Carbide
Drive Double Belt Drive System w/ Hand-actuated clutching
Rate Bed Edging: 10 to 30 ft. Per Min
Trenching: 7 to 30 ft. Per Min
Depth 2”-4” deep
Overall Width 26 Inches
Overall Height 52 Inches (Operating Configuration)
42 Inches (Handle Folded)
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Zero-Turn Riding Mower
4HR-$125
DAY-$125
24HR-$160
Ariens
Zoom 42 in. 19 HP Kohler V Twin Zero-Turn Riding Mower
Well-suited to cut and maintain small to medium-sized yards
Comfortably cut with the foot lever system and high-back seat
Steel frame and durable tires offer stability while you work
The Ariens Zoom 42 is a compact rider that is full of confidence. Combining comfort, convenience and capabilities, the Ariens Zoom 42 is fully equipped to manicure small to medium-sized yards with ease. An effortless foot lever system and premium high-back seat allow you to cut with convenience and comfort. 19 HP Kohler 6000 series twin-cylinder engine offers powerful performance 12-Gauge, stamped-steel deck with 3 maintenance free spindles is engineered for maximum airflow and exceptional cutting performance 42 in. cutting width mows more grass in fewer passes. Twin EZT hydrostatic transaxles designed to deliver responsive, smooth, effortless control. Foot operated deck lift to adjust the height of cut from 1.5 in. to 4.5 in. 18 in. in tall high back seat for maximum riding comfort. 4-point professional deck hanging system provides a stable ride and consistent cutting performance
Dimensions
Assembled Depth (in.)
64 in
Assembled Height (in.)
43 in
Assembled Width (in.)
54 in
Cutting Width
42 inches
Front Wheel Size (in.)
11
Mower Deck Width
42 in
Rear Wheel Size (in.)
18
Turning Radius (in.)
0
Commercial / Residential Residential
Cutting Options Bag,Mulch,Side-Discharge
Deck Material 12 Gauge Steel
Deck Type Stamped
Drive Type Rear-wheel Drive
Engine Displacement (cc) 660
Engine Make Kohler
Engine Torque (ft.-lb.) 27.7
Features Keyed start,Mulching Lawn Mower,Zero-Turn Capable
Fuel Tank Capacity (gallons) 2
Horsepower (hp) 19 hp
Maximum Cutting Height (in.) 4.5
Maximum Forward Speed (mph) 6
Maximum Reverse Speed (mph) 3
Minimum Cutting Height (in.) 1.5
Mower Size Small
Number of Blades 3
Number of Cylinders V-Twin
Number of Deck Wheels 4
Power Type Gas
Product Weight (lb.) 440 lb
Size of Yard 1/2 – 2 Acres
Start Type Electric
Terrain Type Flat with Obstacles
Transmission Type Hydrostatic
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Poulan Push Walk Behind Mower
4HR-$25
DAY-$35
24HR-$45
This push walk behind mower is perfect for residential lawn maintenance and is powered by a reliable Briggs & Stratton 500 Series engine. A 21 in. stamped steel cutting deck is well-suited for most suburban yards. A 11 in. high rear wheel provides good maneuverability and works best on flat, hilly and uneven terrain.
Side discharge or mulching push mower (this unit will not accommodate a bagger).
5 positions height adjuster
7 in. front wheels with 11 in. rear wheels for extra maneuverability
2.7 HP at max RPM
21 in. Walk-Behind Gas Push Mower
Powered by a Reliable Briggs & Stratton 500 Series Engine
12-in. High Rear Easy-Rolling Wheels for Better Maneuverability
2-in-1: Mulch and Side Discharge
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Poly Push Lawn Roller
4HR-$15
DAY-$20
24HR-$25
18 in. x 24 in. 270 lb. Combination Push Poly Lawn Roller
Easy to push
Holds up to 270 lbs. of sand or water
Rugged steel design with rounded ends to prevent damage to lawn
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT