Plugr Aerator
4HR-$45
DAY-$65
24HR-$70
This compact 18″ aerator is ideal for smaller property aeration or rentals and features reciprocating cam Tines that propel the unit forward and drive cores up to 2.75″ deep. The unit can aerate up to 22,000 sq. ft. per hour, is simple to operate for homeowners, easy to steer without lifting and requires no add-on weights.
Engine Honda
Displacement (cc) 118
Tines 4
Weight (lbs) 240
Core Depth (in) Up to 2.75
Core Spacing (in) 3.63 x 6
Length (in) 57
Width (in) 24
Height (in) 40
Wheels (in) 12
Wheel Type Semi-pneumatic
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Related Products
24 Inch Brush Cutter
MIN-$60
DAY-$75
24HR-$95
Billy Goat Outback 24″Brush Cutter
Nearly Indestructible
Say good-bye to sickle mowers, hand held cutters, chainsaws, etc. Designed for abuse, the Billy Goat Outback Brush Cutter cuts a clear path through the densest brush, grass and weeds over 8 feet tall, saplings up to 1.5 inches in diameter, and other problem vegetation at the rate of 2/3 acre per hour. If the front brush card can push it over, the Outback Brush Cutter will cut it
.
Tough Enough,The Billy Goat Outback Brush Cutter is designed and thoroughly tested to withstand an unexpected encounter with almost anything without breaking the blade or throwing a belt. The Billy Goat Outback Brush Cutter has innovative skids allow for easier maneuverability from side to side and enhance tire traction over rough terrain.
Tight Quarters
The Billy Goat Outback Brush Cutter has three forward speeds plus a reverse gear make cutting your way through tough terrain and vegetation much easier
The Outback® Brush Cutter cuts it – Perfect for clearing unwanted grass, weeds, brush and saplings
Rear discharge deck – Cut debris rolls out slowly and safely after it is cut
SPECIFICATIONS
BC2402H
Engine Type Honda GXV
Model Number GXV390UTIDABG
Horsepower 13.0
Fuel Capacity 2.3 qt
Oil Capacity 1.2 qt
Engine Weight 70.5 lb
Unit Weight 278 lb
Overall Length 82.5 in (2.09 m)
Overall Width 32.0 in (0.81 m)
Overall Height 43 in (1.09 m)
Maximum Operating Slope 20o
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
36 Inch Lawn Roller
4HR-$20
DAY-$25
24HR-$30
18″ x 36″ steel lawn roller made from sturdy 11-gauge steel. Features a 1″ full-length axle running through the entire drum. Rolled edges on each drum to prevent turf damage, grease fittings on removable bearings, spring-loaded scraper bar to keep drum clean, 2″ fill opening with expansion plug and a convertible handle for pushing or towing.
138 lbs. empty
572 lbs. water-filled.
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Billy Goat Aerator
4HR-$60
DAY-$80
24HR-$99
This unit completely eliminates the conventional and cumbersome center wheel and center drum designs found on other units, which are prone to wear, vibration and damage. Billy Goat’s outboard drive wheels also eliminate center wheel slip and abuse from ramp loading with the tines engaged.
Additionally, the AE401 also eliminates bulky steel weights, in favor of a simple to use water weight positioned directly over the tines for better aeration depth (full tank = 50 lbs.). The unit features the industry’s softest tine engagement and exclusive Lift N Lock disengagement for best in class comfort and productivity. After use and during transport, tilt up serviceability, removable tine stars, and Fold-n-Go handles, and easy adjust drive chains make service and transport convenient and simple.
Engine Honda
Displacement (cc) 118
Coring Tines (in) .625 x 3.5
Tines 24
Tine Pattern (in) 4.5 x 7
Weight (lbs) 242
Length (in) 57
Width (in) 29
Height (in) 52.5
Wheel Type Semi-pneumatic
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Sidewalk Edger
4HR-$35
DAY-$40
24HR-$50
The Pro Edger is user–friendly with fingertip controls and a ratchet–arm height adjustment system for fatigue–free operation and control. The Little Wonder Pro Edger is built for heavy, daily usage. Cut create crisp, distinct edges faster, and with less effort.
Available with Honda® GX120 engine
Edges up to 90 feet per minute. Get the job done quickly and more efficiently!
Largest available cast iron cutter head on the market
Dual belt drive provides extra power to the blade and reduces slippage during application.
10″ steel blade is sharpened on all four sides giving you the ability to flip the blade over and extends time between sharpening
Adjust cutting depth up to 4″
Blade shield keeps debris off the belts
Convenient controls adjust depth, belt tension, and blade engagement all from the operator’s position
Anti-vibration grip for user comfort
Four wheel design provides extra stability and eliminates the need for a curb wheel.
All wheels have steel hubs with ball bearings and full axles front and rear for smoother and easier
maneuverability
Engine Honda GX120
Handles Anti-Vibration Grips
Displacement 118cc
Cast Iron Cutter Head Fixed
Drive Belt Dual Belts Dual Belts
Edging Depth Up to 4 inches
Steel Hubbed 8″ Wheels 4
Weight (pounds) 69
Fuel Capacity 3 quart
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Bed Edger
4HR-$60
DAY-$75
24HR-$95
Model F791H BedEdger
The Model F791H provides the maneuverability and power you’ve been needing. Features Honda Engines and steerable wheels.
Engine Honda Commercial
Weight 170 lbs/77Kg
Wheels Steel with Pneumatic Tires
Points Tungsten Carbide
Drive Double Belt and Pulley System
Rate Bed Edging: 10 to 30 ft. Per Min
Depth 2 to 4 Inches*
Width 1/2 to 9 Inches*
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Lawn Solutions Slit Seeder
MIN-$80
DAY-$99
24HR-$120
Durable, lightweight and easy to use, Operators can make a tight turn — even on hills. The variable-speed
drive system operates in forward and reverse. All models are constructed of solid 11-gauge steel for
maximum durability. Blades are made of high-carbon, heat-treated spring steel that can handle abuse
without chipping or bending. A large 40 lb. capacity seed mixer regulates seed delivery based on ground
speed for even application.
Specifications
Blade Type 10 Verticutting Blades
Engine Subaru® EX27
Fuel Capacity 1.6 gallons
Ground Speed 3 mph (4.8 km/h) (forward); 2.2 mph (3.5 km/h) (reverse) Height 28″ (handle folded) 45″ (handle up)
Hopper Capacity 40 lbs. (18 kg)
Length 27″ (69 cm) (handle folded) 52″ (132 cm) (handle up)
Seeding Depth Up to 1″ (2.5 cm)
Weight 260 lbs (118 kg)
Width 30″ (76 cm)
Working Width 20″ (51 cm)
Disclaimer
All walk-behind machines comply with ANSI safety standards: B71.4 for commercial turf care equipment or
B71.8 for OPE walk-behind ground-engaging equipment.
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Classen Self-Propelled Turf Rake and Dethatcher
4HR-$55
DAY-$65
24HR-$80
Dethatch on hills and grades much easier with the fatigue-free operation of the Classen Self-Propelled Turf
Rake. Easily converts to a turf seeder, or vertical cutter. Folding handle makes it easy to transport.
• Operates forward and reverse
• Infinitely variable speed from 0 to 3.4 mph
• Makes loading and unloading on ramps a snap
• Great on hills
• Infinite speed from 0 to 3.4 mph eliminates fatigue on operator
• Folding handle for easy transportation
• 28 heat–treated flail blades with spacing of 11/16? standard adjustable up to 1–3/8?
• 5-position, single action height adjustment
• Heavy–duty, greasable bearings with cast iron housings
• Wheels have sealed bearings and semi–pneumatic tires
Dimensions 40″ H x 31.5″ W x 43.5″ L
Dimensions (handle folded) 34.5″ H x 31.5″ W x 30.5″ L
Dry Weight 215 lbs.
Engine Honda® GX160
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Tow Behind Spike Aerator
4HR-$20
DAY-$25
24HR-$30
Tow Spike Aerator
Item weight full- 291lbs
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT