Stump Grinder 26HP
The TORO STX-26 Stump Grinder brings simple control and serious power to tree care
maintenance. The STX-26 stump grinder features Toro’s patented Dingo® TX-style control system
that is intuitive and easy to operate. The Intelli-Sweep™ cutter head control feature automatically
slows the sweep speed of the cutting head based on the load on the wheel, so heavy cutting loads
won’t bog down the engine. And, with a powerful Kawasaki® engine, tracks and transport speeds
exceeding 4 mph (6.4 km/h), the STX-26 provides ample power with a light footprint for exactly what
you need to get in position and get to work quickly.
Hydraulically Driven
cutter ead
• 13.5 gpm of hydraulic flow
directly to the cutter head to
maximize performance
• Eliminate labor of tightening or
replacing costly poly-chain belts
or clutches
• Eliminates shock loads to the
engine from belts slipping or
stopping
• No need to replace expensive
cogged pulleys
Hi-Drive Track System
• Low center of gravity increases
stability on side hills or uneven
terrain
• Eliminates tire ruts and flat tires
• Track design allows for zero turn
capability for those difficult to
access stumps
• Forward transport speed in
excess of 4 mph
• 10 gpm of hydraulic flow to each
track to maximize traction performance
User-Friendly Design
• Patented, TX controls are intuitive
and easy to use
• All-hydraulic sweep control valve
facilitates side-to-side feathering
• Offset cutting head results in
excellent visibility, regardless of
stump size
• Powerful Kawasaki®
FX-730V
engine for grinding stumps of all
sizes
• Innovative grinder teeth can be
rotated for added longevity and
are easily replaceable
Engine Kawasaki®
FX-730V 4-cycle gasoline air-cooled engine
Hydraulics 13.5 gpm hydraulic flow to cutter head;
10 gpm of hydraulic flow to each track
Wheel 19″ (48.2 cm) diameter to tooth;
0.75″ (1.9 cm) thick; 16 grinder teeth
Cutter Depth 12.5″ (32 cm) below grade
Cutter Height 33″ (84 cm) above grade
Head Swing 47″ (120 cm) arc x 90° sweep arc
Dimensions 34″ (86 cm) W x 78″ (198 cm) L (transport) x 46″ (117 cm) H
Weight 1200 lbs (544 kg)
Max. Travel Speed 4.2 mph (6.8 km/h) forward; 1.6 mph (2.6 km/h) reverse
4HR-$235
DAY-$235
24HR-$235
THE MINIMUM RATE FOR THIS ITEM IS 24HR
THIS UNIT HAS ITS OWN TRAILER, THAT IT MUST BE TRANSPORTED ON
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Related Products
Classen Tow Behind Aerator
4HR-$55
DAY-$65
24HR-$80
These heavy–duty core aerators are easily used with the average 15 hp riding mower or tractor. Whether your
aeration job is a lawn, sports field, or municipal facility, there’s a Classen tow–behind core aerator that’s just
right for you.
Lift Manual
Dimensions 34″ H x 56″ W x 62″ L
Aerating Width 42″
No. of Tines 48
Hitch Type Tow/ 3 point
Load Capacity (pounds) 780
Weight (pounds) 320
• Constructed of 1-1/2″ x 1-1/2″ solid steel (not square tubing)
• Weight tray for optional added weight
• Tine shafts operate independently for greater turning ease
• Built 1.5″ x 1.5″ solid steel (not square tubing)
• Aerate up to 4″ deep
• Hole pattern 5.25? x 7?
• Wheels rotate 90 degrees
• Available in 42″ and 52″ widths
• Flexible hitch system
• Can be mounted with 3-point mount or hitch mount
• 48RT can be pulled by a riding mower
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Lawn Solutions Slit Seeder
MIN-$80
DAY-$99
24HR-$120
Durable, lightweight and easy to use, Operators can make a tight turn — even on hills. The variable-speed
drive system operates in forward and reverse. All models are constructed of solid 11-gauge steel for
maximum durability. Blades are made of high-carbon, heat-treated spring steel that can handle abuse
without chipping or bending. A large 40 lb. capacity seed mixer regulates seed delivery based on ground
speed for even application.
Specifications
Blade Type 10 Verticutting Blades
Engine Subaru® EX27
Fuel Capacity 1.6 gallons
Ground Speed 3 mph (4.8 km/h) (forward); 2.2 mph (3.5 km/h) (reverse) Height 28″ (handle folded) 45″ (handle up)
Hopper Capacity 40 lbs. (18 kg)
Length 27″ (69 cm) (handle folded) 52″ (132 cm) (handle up)
Seeding Depth Up to 1″ (2.5 cm)
Weight 260 lbs (118 kg)
Width 30″ (76 cm)
Working Width 20″ (51 cm)
Disclaimer
All walk-behind machines comply with ANSI safety standards: B71.4 for commercial turf care equipment or
B71.8 for OPE walk-behind ground-engaging equipment.
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
24 Inch Brush Cutter
MIN-$60
DAY-$75
24HR-$95
Billy Goat Outback 24″Brush Cutter
Nearly Indestructible
Say good-bye to sickle mowers, hand held cutters, chainsaws, etc. Designed for abuse, the Billy Goat Outback Brush Cutter cuts a clear path through the densest brush, grass and weeds over 8 feet tall, saplings up to 1.5 inches in diameter, and other problem vegetation at the rate of 2/3 acre per hour. If the front brush card can push it over, the Outback Brush Cutter will cut it
.
Tough Enough,The Billy Goat Outback Brush Cutter is designed and thoroughly tested to withstand an unexpected encounter with almost anything without breaking the blade or throwing a belt. The Billy Goat Outback Brush Cutter has innovative skids allow for easier maneuverability from side to side and enhance tire traction over rough terrain.
Tight Quarters
The Billy Goat Outback Brush Cutter has three forward speeds plus a reverse gear make cutting your way through tough terrain and vegetation much easier
The Outback® Brush Cutter cuts it – Perfect for clearing unwanted grass, weeds, brush and saplings
Rear discharge deck – Cut debris rolls out slowly and safely after it is cut
SPECIFICATIONS
BC2402H
Engine Type Honda GXV
Model Number GXV390UTIDABG
Horsepower 13.0
Fuel Capacity 2.3 qt
Oil Capacity 1.2 qt
Engine Weight 70.5 lb
Unit Weight 278 lb
Overall Length 82.5 in (2.09 m)
Overall Width 32.0 in (0.81 m)
Overall Height 43 in (1.09 m)
Maximum Operating Slope 20o
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
36 Inch Lawn Roller
4HR-$20
DAY-$25
24HR-$30
18″ x 36″ steel lawn roller made from sturdy 11-gauge steel. Features a 1″ full-length axle running through the entire drum. Rolled edges on each drum to prevent turf damage, grease fittings on removable bearings, spring-loaded scraper bar to keep drum clean, 2″ fill opening with expansion plug and a convertible handle for pushing or towing.
138 lbs. empty
572 lbs. water-filled.
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
26 Inch Brush Cutter
4HR-$70
DAY-$90
24HR-$105
Make quick work of under-brush, berries, saplings, bramble, vines, tall grass and small trees! The Outback® BC26 can cut saplings up to 2′ wide and brush 6′ tall – all at a rate of just under an acre of brush per hour.
The BC26 has a 26″ wide deck with higher tip speed for improved speed and cut quality. This nature-taming performer comes standard with a Tuff Torq™ hydrostatic transmission featuring fully automatic Enhanced Traction Control (ETC ), offering superior traction in wet or uneven conditions. Engineered to glide over uneven terrain, the pivoting brush deck hugs the ground for a better cut. This minimizes scalping and improves traction by keeping the weight of the machine on its drive wheels. (Honda engine version can handle up to 20-degree slopes
Ergonomically-angled plow-style handles with padded grips offer comfort and protection. Never take your hands off the machine to shift gears with conveniently located controls.
Step up to the Billy Goat Outback BC26 and dramatically improve your productivity.
SPECS
Engine Brand Honda
Displacement (cc) 390
Start Pull
Cut Width (in) 26
Cut Height (in) 3.75
Weight (lbs) 317
Length (in) 83
Width (in) 31
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Tow Behind Spike Aerator
4HR-$20
DAY-$25
24HR-$30
Tow Spike Aerator
Item weight full- 291lbs
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Classen Self-Propelled Turf Rake and Dethatcher
4HR-$55
DAY-$65
24HR-$80
Dethatch on hills and grades much easier with the fatigue-free operation of the Classen Self-Propelled Turf
Rake. Easily converts to a turf seeder, or vertical cutter. Folding handle makes it easy to transport.
• Operates forward and reverse
• Infinitely variable speed from 0 to 3.4 mph
• Makes loading and unloading on ramps a snap
• Great on hills
• Infinite speed from 0 to 3.4 mph eliminates fatigue on operator
• Folding handle for easy transportation
• 28 heat–treated flail blades with spacing of 11/16? standard adjustable up to 1–3/8?
• 5-position, single action height adjustment
• Heavy–duty, greasable bearings with cast iron housings
• Wheels have sealed bearings and semi–pneumatic tires
Dimensions 40″ H x 31.5″ W x 43.5″ L
Dimensions (handle folded) 34.5″ H x 31.5″ W x 30.5″ L
Dry Weight 215 lbs.
Engine Honda® GX160
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Zero-Turn Riding Mower
4HR-$125
DAY-$125
24HR-$160
Ariens
Zoom 42 in. 19 HP Kohler V Twin Zero-Turn Riding Mower
Well-suited to cut and maintain small to medium-sized yards
Comfortably cut with the foot lever system and high-back seat
Steel frame and durable tires offer stability while you work
The Ariens Zoom 42 is a compact rider that is full of confidence. Combining comfort, convenience and capabilities, the Ariens Zoom 42 is fully equipped to manicure small to medium-sized yards with ease. An effortless foot lever system and premium high-back seat allow you to cut with convenience and comfort. 19 HP Kohler 6000 series twin-cylinder engine offers powerful performance 12-Gauge, stamped-steel deck with 3 maintenance free spindles is engineered for maximum airflow and exceptional cutting performance 42 in. cutting width mows more grass in fewer passes. Twin EZT hydrostatic transaxles designed to deliver responsive, smooth, effortless control. Foot operated deck lift to adjust the height of cut from 1.5 in. to 4.5 in. 18 in. in tall high back seat for maximum riding comfort. 4-point professional deck hanging system provides a stable ride and consistent cutting performance
Dimensions
Assembled Depth (in.)
64 in
Assembled Height (in.)
43 in
Assembled Width (in.)
54 in
Cutting Width
42 inches
Front Wheel Size (in.)
11
Mower Deck Width
42 in
Rear Wheel Size (in.)
18
Turning Radius (in.)
0
Commercial / Residential Residential
Cutting Options Bag,Mulch,Side-Discharge
Deck Material 12 Gauge Steel
Deck Type Stamped
Drive Type Rear-wheel Drive
Engine Displacement (cc) 660
Engine Make Kohler
Engine Torque (ft.-lb.) 27.7
Features Keyed start,Mulching Lawn Mower,Zero-Turn Capable
Fuel Tank Capacity (gallons) 2
Horsepower (hp) 19 hp
Maximum Cutting Height (in.) 4.5
Maximum Forward Speed (mph) 6
Maximum Reverse Speed (mph) 3
Minimum Cutting Height (in.) 1.5
Mower Size Small
Number of Blades 3
Number of Cylinders V-Twin
Number of Deck Wheels 4
Power Type Gas
Product Weight (lb.) 440 lb
Size of Yard 1/2 – 2 Acres
Start Type Electric
Terrain Type Flat with Obstacles
Transmission Type Hydrostatic
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT