18″ Rear Tine Tiller
The 712 is equipped to handle garden plots and smaller garden applications, but is limited in power for
larger activities. Anti-vibe handlebars instantly adjust both vertically and side-to-side.
Weight: 280 lbs
Working Speeds: 1 forward, 1 reverse
Working Wheel Speeds: 0.6 and 1.4 MPH
Standard Wheel Size: 4” x 8”
Transmission: All Gear Drive
Axle Configuration: Straight Axle
Clutch Type: Double Cone, Spring-Loaded
4HR-$80
DAY-$95
24HR-$115
THIS ITEM REQUIRES A PICK-UP TRUCK OR TRAILER FOR TRANSPORTATION
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Related Products
Lawn Solutions Slit Seeder
MIN-$80
DAY-$99
24HR-$120
Durable, lightweight and easy to use, Operators can make a tight turn — even on hills. The variable-speed
drive system operates in forward and reverse. All models are constructed of solid 11-gauge steel for
maximum durability. Blades are made of high-carbon, heat-treated spring steel that can handle abuse
without chipping or bending. A large 40 lb. capacity seed mixer regulates seed delivery based on ground
speed for even application.
Specifications
Blade Type 10 Verticutting Blades
Engine Subaru® EX27
Fuel Capacity 1.6 gallons
Ground Speed 3 mph (4.8 km/h) (forward); 2.2 mph (3.5 km/h) (reverse) Height 28″ (handle folded) 45″ (handle up)
Hopper Capacity 40 lbs. (18 kg)
Length 27″ (69 cm) (handle folded) 52″ (132 cm) (handle up)
Seeding Depth Up to 1″ (2.5 cm)
Weight 260 lbs (118 kg)
Width 30″ (76 cm)
Working Width 20″ (51 cm)
Disclaimer
All walk-behind machines comply with ANSI safety standards: B71.4 for commercial turf care equipment or
B71.8 for OPE walk-behind ground-engaging equipment.
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
36 Inch Lawn Roller
4HR-$20
DAY-$25
24HR-$30
18″ x 36″ steel lawn roller made from sturdy 11-gauge steel. Features a 1″ full-length axle running through the entire drum. Rolled edges on each drum to prevent turf damage, grease fittings on removable bearings, spring-loaded scraper bar to keep drum clean, 2″ fill opening with expansion plug and a convertible handle for pushing or towing.
138 lbs. empty
572 lbs. water-filled.
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
5′ Brush Cutter
Description
The RCR12 Series is an economically-priced Rotary Cutter, capable of cutting 1″ diameter material and
is ideal for daily use in small lots and hobby farm grass maintenance. These cutters offer fast, clean,
dependable mowing and have been extensively tested to ensure operating safety. High blade tip
speeds assure a clean cut in a variety of field conditions. The standard stump jumper slides over stumps,
rocks and debris and safety guards protect you and your property
Surpassed rugged industry standards
All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures
specified by ANSI.
Tractor HP range 18 – 60 HP
Cat. 3 driveline with shearbolt, Shear bolt offers maximum driveline protection.
Cat. 3 driveline with 2-plate slip-clutch Slip-clutch driveline offers convenience for continual work.
Floating top link Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole
position to allow greater lift leverage for smaller tractors.
Round back design Helps discharge grass better than enclosed or partially enclosed cutters.
1 1/4″ – 10″ Cutting Height Cutting height for wide range of cutting conditions.
1/2″ x 3″ Heat-treated free swinging blades Free swinging protects from obstructions. Heat-treated
offers longer life.
Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output
shaft.
10 Gauge stump jumper Allows cutter to slide over obstructions protecting the gearbox output shaft.
High blade tip speed Ensures clean cut.
Laminated tailwheel Laminated material is long lasting in rough conditions and can’t go flat.
Heavy-duty spindle on tailwheel 1 1/4″ spindle gives the strength to protect tailwheel assembly
4HR-$99
DAY-$99
24HR-$120
THE MINIMUM RATE FOR THIS ITEM IS DAY
THE RATE OF THIS ITEM WILL BE ADDED TO TRACTOR RENTAL
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
24 Inch Brush Cutter
MIN-$60
DAY-$75
24HR-$95
Billy Goat Outback 24″Brush Cutter
Nearly Indestructible
Say good-bye to sickle mowers, hand held cutters, chainsaws, etc. Designed for abuse, the Billy Goat Outback Brush Cutter cuts a clear path through the densest brush, grass and weeds over 8 feet tall, saplings up to 1.5 inches in diameter, and other problem vegetation at the rate of 2/3 acre per hour. If the front brush card can push it over, the Outback Brush Cutter will cut it
.
Tough Enough,The Billy Goat Outback Brush Cutter is designed and thoroughly tested to withstand an unexpected encounter with almost anything without breaking the blade or throwing a belt. The Billy Goat Outback Brush Cutter has innovative skids allow for easier maneuverability from side to side and enhance tire traction over rough terrain.
Tight Quarters
The Billy Goat Outback Brush Cutter has three forward speeds plus a reverse gear make cutting your way through tough terrain and vegetation much easier
The Outback® Brush Cutter cuts it – Perfect for clearing unwanted grass, weeds, brush and saplings
Rear discharge deck – Cut debris rolls out slowly and safely after it is cut
SPECIFICATIONS
BC2402H
Engine Type Honda GXV
Model Number GXV390UTIDABG
Horsepower 13.0
Fuel Capacity 2.3 qt
Oil Capacity 1.2 qt
Engine Weight 70.5 lb
Unit Weight 278 lb
Overall Length 82.5 in (2.09 m)
Overall Width 32.0 in (0.81 m)
Overall Height 43 in (1.09 m)
Maximum Operating Slope 20o
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Poly Push Lawn Roller
4HR-$15
DAY-$20
24HR-$25
18 in. x 24 in. 270 lb. Combination Push Poly Lawn Roller
Easy to push
Holds up to 270 lbs. of sand or water
Rugged steel design with rounded ends to prevent damage to lawn
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Lawn Solutions Walk Behind Aerator
MIN-$60
DAY-$80
24HR-$99
This model features a unique hydraulic drive system that provides excellent maneuverability and ease of use — no need to raise the tines to turn the machine. A wide unibody frame with 10-gauge steel construction and outboard drive wheels give this machine a low center of gravity for excellent side hill stability. Plus, it’s compact enough to get into the tightest areas and can aerate in reverse to back out. Handles fold to make transport and storage a snap. Self-cleaning tines are capable of creating plugs up to 4″ deep, depending on ground conditions.
Specifications
Aerating Depth Up to 3″ Aerating
Width 21″
Engine HONDA
Fuel Capacity 1 gallon
Ground Speed 4 mph (forward)/2.2 mph (reverse)
Height 38″ (handle folded) 46″ (handle up)
Length 48″ (handle folded) 50″ (handle up)
Weight 320 lbs. (with 1-27 lb. weight) 285 lbs. (w/out weights)
Width 31.5″
Disclaimer
All walk-behind machines comply with ANSI safety standards: B71.4 for commercial turf care equipment or
B71.8 for OPE walk-behind ground-engaging equipment.
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Stihl BG 86 Handheld Blower
MIN-$35
DAY-$45
24HR-$55
For the toughest landscaping challenges, professionals turn to one of the most powerful gasoline-powered handheld blowers, the STIHL BG 86. It features a fuel-efficient, low-emission gasoline-powered engine, and includes both flat and round nozzle attachments for better job versatility. The blower is also one of the most
comfortable to use, with a four-spring anti-vibration system, a soft-grip handle and our ElastoStart shock-absorbing starter.
1 Gallon of mixed fuel is provided with this rental
DISPLACEMENT 27.2 cc (1.66 cu. in.)
ENGINE POWER 0.8 kW (1.07 bhp)
WEIGHT 4.4 kg (9.7 Ibs.)
FUEL CAPACITY 440 cc (14.9 oz.)
BLOWING FORCE* 15 Newtons
AVG. AIR VELOCITY** Flat: 74 m/sec. (166 mph)
Round: 63 m/sec. (141 mph)
MAX. AIR VELOCITY** Flat: 85 m/sec. (190 mph)
Round: 69 m/sec. (154 mph)
AIR VOLUME AT NOZZLE** Flat: 620 m3/h (365 cfm)
Round: 755 m3/h (444 cfm)
SOUND PRESSURE RATING** 70 dB(A)
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
9HP Walk Behind Blower
4HR-$55
DAY-$70
24HR-$85
Optimax
Advanced impeller and aerodynamic design produce the highest airflow in the industry
Unique split-stream air deflector moves piles of leaves farther and faster; without blow-back!
Large, square discharge chute is low to the ground for better blowing power
Scrolled housing ensures consistent, constant airflow even if partially blocked by leaves
Continuously welded all-steel impeller and housing for strength and durability you can rely on season after season
Remote discharge chute control on the handle at your fingertips
Ergonomic handle design; height adjustable with anti-vibration grip
Transport bracket for convenient tie-down during transport.
Convenient lift handle makes lifting the blower on and off the truck easier.
Optional Swivel Wheel Kit for 360° turning
Engine Honda GX270 Subaru EX27
Displacement 270cc 265cc
Fuel Capacity 1.4 Gal. 1.6 Gal.
Air Cleaner type Dual Element Dual Element
Low Oil Sensor Standard Standard
Impeller (diameter, type ) 17″, 7 blade steel, reverse angle 17″, 7 blade steel, reverse angle
Impeller depth 2.75″ 2.75″
Discharge Chute Area 25.8 sq ” 25.8 sq ”
Air Volume 2260 cfm 2260 cfm
Air Speed 153 mph 143 mph 143 mph
Integrated Front Discharge Yes Yes
Throttle Control Remote Remote
Air Flow Control Remote Remote
Dimensions
(Height, Width, Length) 43″ x 28″ x 56″ 43″ x 28″ x 58″
Tires, Front 10″ pneumatic front tire w/ tube
Tires, Rear 12″ pneumatic rear tires w/ tube
Handle Ergonomic 2-position adjustable; anti-vibration grip
Transport Bracket Yes Yes
Lift Handle Yes Yes
Housing Continuously-welded steel; 1 piece engine deck
Weight 142 lbs 140 lbs
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT