26 Inch Brush Cutter
4HR-$70
DAY-$90
24HR-$105
Make quick work of under-brush, berries, saplings, bramble, vines, tall grass and small trees! The Outback® BC26 can cut saplings up to 2′ wide and brush 6′ tall – all at a rate of just under an acre of brush per hour.
The BC26 has a 26″ wide deck with higher tip speed for improved speed and cut quality. This nature-taming performer comes standard with a Tuff Torq™ hydrostatic transmission featuring fully automatic Enhanced Traction Control (ETC ), offering superior traction in wet or uneven conditions. Engineered to glide over uneven terrain, the pivoting brush deck hugs the ground for a better cut. This minimizes scalping and improves traction by keeping the weight of the machine on its drive wheels. (Honda engine version can handle up to 20-degree slopes
Ergonomically-angled plow-style handles with padded grips offer comfort and protection. Never take your hands off the machine to shift gears with conveniently located controls.
Step up to the Billy Goat Outback BC26 and dramatically improve your productivity.
SPECS
Engine Brand Honda
Displacement (cc) 390
Start Pull
Cut Width (in) 26
Cut Height (in) 3.75
Weight (lbs) 317
Length (in) 83
Width (in) 31
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Related Products
24 Inch Brush Cutter
MIN-$60
DAY-$75
24HR-$95
Billy Goat Outback 24″Brush Cutter
Nearly Indestructible
Say good-bye to sickle mowers, hand held cutters, chainsaws, etc. Designed for abuse, the Billy Goat Outback Brush Cutter cuts a clear path through the densest brush, grass and weeds over 8 feet tall, saplings up to 1.5 inches in diameter, and other problem vegetation at the rate of 2/3 acre per hour. If the front brush card can push it over, the Outback Brush Cutter will cut it
.
Tough Enough,The Billy Goat Outback Brush Cutter is designed and thoroughly tested to withstand an unexpected encounter with almost anything without breaking the blade or throwing a belt. The Billy Goat Outback Brush Cutter has innovative skids allow for easier maneuverability from side to side and enhance tire traction over rough terrain.
Tight Quarters
The Billy Goat Outback Brush Cutter has three forward speeds plus a reverse gear make cutting your way through tough terrain and vegetation much easier
The Outback® Brush Cutter cuts it – Perfect for clearing unwanted grass, weeds, brush and saplings
Rear discharge deck – Cut debris rolls out slowly and safely after it is cut
SPECIFICATIONS
BC2402H
Engine Type Honda GXV
Model Number GXV390UTIDABG
Horsepower 13.0
Fuel Capacity 2.3 qt
Oil Capacity 1.2 qt
Engine Weight 70.5 lb
Unit Weight 278 lb
Overall Length 82.5 in (2.09 m)
Overall Width 32.0 in (0.81 m)
Overall Height 43 in (1.09 m)
Maximum Operating Slope 20o
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Tow Behind Spike Aerator
4HR-$20
DAY-$25
24HR-$30
Tow Spike Aerator
Item weight full- 291lbs
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Stihl BG 86 Handheld Blower
MIN-$35
DAY-$45
24HR-$55
For the toughest landscaping challenges, professionals turn to one of the most powerful gasoline-powered handheld blowers, the STIHL BG 86. It features a fuel-efficient, low-emission gasoline-powered engine, and includes both flat and round nozzle attachments for better job versatility. The blower is also one of the most
comfortable to use, with a four-spring anti-vibration system, a soft-grip handle and our ElastoStart shock-absorbing starter.
1 Gallon of mixed fuel is provided with this rental
DISPLACEMENT 27.2 cc (1.66 cu. in.)
ENGINE POWER 0.8 kW (1.07 bhp)
WEIGHT 4.4 kg (9.7 Ibs.)
FUEL CAPACITY 440 cc (14.9 oz.)
BLOWING FORCE* 15 Newtons
AVG. AIR VELOCITY** Flat: 74 m/sec. (166 mph)
Round: 63 m/sec. (141 mph)
MAX. AIR VELOCITY** Flat: 85 m/sec. (190 mph)
Round: 69 m/sec. (154 mph)
AIR VOLUME AT NOZZLE** Flat: 620 m3/h (365 cfm)
Round: 755 m3/h (444 cfm)
SOUND PRESSURE RATING** 70 dB(A)
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
5′ Brush Cutter
Description
The RCR12 Series is an economically-priced Rotary Cutter, capable of cutting 1″ diameter material and
is ideal for daily use in small lots and hobby farm grass maintenance. These cutters offer fast, clean,
dependable mowing and have been extensively tested to ensure operating safety. High blade tip
speeds assure a clean cut in a variety of field conditions. The standard stump jumper slides over stumps,
rocks and debris and safety guards protect you and your property
Surpassed rugged industry standards
All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures
specified by ANSI.
Tractor HP range 18 – 60 HP
Cat. 3 driveline with shearbolt, Shear bolt offers maximum driveline protection.
Cat. 3 driveline with 2-plate slip-clutch Slip-clutch driveline offers convenience for continual work.
Floating top link Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole
position to allow greater lift leverage for smaller tractors.
Round back design Helps discharge grass better than enclosed or partially enclosed cutters.
1 1/4″ – 10″ Cutting Height Cutting height for wide range of cutting conditions.
1/2″ x 3″ Heat-treated free swinging blades Free swinging protects from obstructions. Heat-treated
offers longer life.
Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output
shaft.
10 Gauge stump jumper Allows cutter to slide over obstructions protecting the gearbox output shaft.
High blade tip speed Ensures clean cut.
Laminated tailwheel Laminated material is long lasting in rough conditions and can’t go flat.
Heavy-duty spindle on tailwheel 1 1/4″ spindle gives the strength to protect tailwheel assembly
4HR-$99
DAY-$99
24HR-$120
THE MINIMUM RATE FOR THIS ITEM IS DAY
THE RATE OF THIS ITEM WILL BE ADDED TO TRACTOR RENTAL
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Plugr Aerator
4HR-$45
DAY-$65
24HR-$70
This compact 18″ aerator is ideal for smaller property aeration or rentals and features reciprocating cam Tines that propel the unit forward and drive cores up to 2.75″ deep. The unit can aerate up to 22,000 sq. ft. per hour, is simple to operate for homeowners, easy to steer without lifting and requires no add-on weights.
Engine Honda
Displacement (cc) 118
Tines 4
Weight (lbs) 240
Core Depth (in) Up to 2.75
Core Spacing (in) 3.63 x 6
Length (in) 57
Width (in) 24
Height (in) 40
Wheels (in) 12
Wheel Type Semi-pneumatic
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Cable Layer
4HR-$60
DAY-$75
24HR-$95
The Model R450H provides the maneuverability and power you’ve been needing. Features GX160 5.5 HP Honda engine. Up to 65 feet per minute, depending on soil conditions
Will produce a savings of 50% to 80% on time and labor
It digs a trench from 2”-4” deep
Tricycle running gear
Very maneuverable; easy to load and unload
Rubber hood controls excavated dirt for less clean-up time
Engine GX160 5.5 HP Honda
Weight 90 Pounds
Wheels Steel w/ 9×3.50-4 pneumatic tires
Points Tungsten Carbide
Drive Double Belt Drive System w/ Hand-actuated clutching
Rate Bed Edging: 10 to 30 ft. Per Min
Trenching: 7 to 30 ft. Per Min
Depth 2”-4” deep
Overall Width 26 Inches
Overall Height 52 Inches (Operating Configuration)
42 Inches (Handle Folded)
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Stump Grinder 9HP
The Stump Cutter by MacKissic is compact and portable with a reversible handle bar for front or rear cutting.
The Stump Cutter has an operator presence handle which when released will engage the braking system and
stop the cutter head in less then 3 seconds. The frame is a uni-body construction with a kickstand that will
protect the cutter head during storage and double as a guard while in use. The engine is protected by the
front bumper which also provides a strong lifting handle and tie down for transportation.
The Stump Cutter features a patented cutter head. The cutter head is set thirty degrees
off vertical to allow for smooth cutting of the stump rather then grinding the stump. The teeth are also
off-set: straight, 25 degrees, and 45 degrees for the smoothest cutter available.
There is still easy access to the cutter head for quick sharpening or replacement.
The handle bars have a height adjustment to allow for differences in operators heights and size of the stump.
From the creators of the small stump cutter category, the new MacKissic Merry Commercial Mini Stump
Cutter continues the tradition of making stump grinding easy.
Stump Cutter action, like its big brother, the Mini’s unique operator position allows the user to see the stump
and cutter head at all times during operation. The cutter head orientation provides smooth stump removal
rivaled only by its big brother. Unlike other stump cutters that impair the operator’s view, the ability to see
the work in progress makes for faster and safer stump removal. Our product category exclusive braking
system stops the cutter head in less than three seconds
Model CPSC82HMC
Engine Honda GX240 Commercial
Engine CC’s 242
Cutter Head Patented tongue and groove system
Cutter Teeth Resharpenable carbide
Cutter Brake Stops in 3 seconds
Wheel Brake 6″ disc w/ mechanical caliper
Cutter Shaft Bearings 1-3/16″ w/ grease fitting
Tires 13″ pneumatic
Start Manual
Weight (lbs.) 305
Height 41″
Width 25″
Lenght Front 73″
Length Rear 88″
4HR-$75
DAY-$90
24HR-$125
FOR EXTENDED PERIOD RATES, PLEASE CALL OUR EQUIPMENT RENTAL DEPARTMENT
Billy Goat Aerator
4HR-$60
DAY-$80
24HR-$99
This unit completely eliminates the conventional and cumbersome center wheel and center drum designs found on other units, which are prone to wear, vibration and damage. Billy Goat’s outboard drive wheels also eliminate center wheel slip and abuse from ramp loading with the tines engaged.
Additionally, the AE401 also eliminates bulky steel weights, in favor of a simple to use water weight positioned directly over the tines for better aeration depth (full tank = 50 lbs.). The unit features the industry’s softest tine engagement and exclusive Lift N Lock disengagement for best in class comfort and productivity. After use and during transport, tilt up serviceability, removable tine stars, and Fold-n-Go handles, and easy adjust drive chains make service and transport convenient and simple.
Engine Honda
Displacement (cc) 118
Coring Tines (in) .625 x 3.5
Tines 24
Tine Pattern (in) 4.5 x 7
Weight (lbs) 242
Length (in) 57
Width (in) 29
Height (in) 52.5
Wheel Type Semi-pneumatic
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT