Classen Tow Behind Aerator
4HR-$55
DAY-$65
24HR-$80
These heavy–duty core aerators are easily used with the average 15 hp riding mower or tractor. Whether your
aeration job is a lawn, sports field, or municipal facility, there’s a Classen tow–behind core aerator that’s just
right for you.
Lift Manual
Dimensions 34″ H x 56″ W x 62″ L
Aerating Width 42″
No. of Tines 48
Hitch Type Tow/ 3 point
Load Capacity (pounds) 780
Weight (pounds) 320
• Constructed of 1-1/2″ x 1-1/2″ solid steel (not square tubing)
• Weight tray for optional added weight
• Tine shafts operate independently for greater turning ease
• Built 1.5″ x 1.5″ solid steel (not square tubing)
• Aerate up to 4″ deep
• Hole pattern 5.25? x 7?
• Wheels rotate 90 degrees
• Available in 42″ and 52″ widths
• Flexible hitch system
• Can be mounted with 3-point mount or hitch mount
• 48RT can be pulled by a riding mower
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Related Products
Lawn Solutions Slit Seeder
MIN-$80
DAY-$99
24HR-$120
Durable, lightweight and easy to use, Operators can make a tight turn — even on hills. The variable-speed
drive system operates in forward and reverse. All models are constructed of solid 11-gauge steel for
maximum durability. Blades are made of high-carbon, heat-treated spring steel that can handle abuse
without chipping or bending. A large 40 lb. capacity seed mixer regulates seed delivery based on ground
speed for even application.
Specifications
Blade Type 10 Verticutting Blades
Engine Subaru® EX27
Fuel Capacity 1.6 gallons
Ground Speed 3 mph (4.8 km/h) (forward); 2.2 mph (3.5 km/h) (reverse) Height 28″ (handle folded) 45″ (handle up)
Hopper Capacity 40 lbs. (18 kg)
Length 27″ (69 cm) (handle folded) 52″ (132 cm) (handle up)
Seeding Depth Up to 1″ (2.5 cm)
Weight 260 lbs (118 kg)
Width 30″ (76 cm)
Working Width 20″ (51 cm)
Disclaimer
All walk-behind machines comply with ANSI safety standards: B71.4 for commercial turf care equipment or
B71.8 for OPE walk-behind ground-engaging equipment.
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
BlueBird Power Rake Dethatcher with Bagger
MIN-$50
DAY-$60
24HR-$70
The PR22 operates as a power rake, seeder, or power rake with rear catcher bag to collect thatch. The modular design provides the option of changing reels quickly and easily. Units are available with or without a reel assembly. Combining the base platform with any reel and/or kit (seeder or bagger), offers versatility for every
application. The PR22 with a bagger makes dethatching and clean-up simple and efficient. The 5 bushel bag is quickly removed and emptied.
Working width: 22 inch
Standard blade type: Flail blade
Engine manufacturer: Honda
Power: 5.5 HP
Product size, LxWxH 26Ÿ x 28 x 40
Weight 144 lbs
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Bed Edger
4HR-$60
DAY-$75
24HR-$95
Model F791H BedEdger
The Model F791H provides the maneuverability and power you’ve been needing. Features Honda Engines and steerable wheels.
Engine Honda Commercial
Weight 170 lbs/77Kg
Wheels Steel with Pneumatic Tires
Points Tungsten Carbide
Drive Double Belt and Pulley System
Rate Bed Edging: 10 to 30 ft. Per Min
Depth 2 to 4 Inches*
Width 1/2 to 9 Inches*
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Stump Grinder 9HP
The Stump Cutter by MacKissic is compact and portable with a reversible handle bar for front or rear cutting.
The Stump Cutter has an operator presence handle which when released will engage the braking system and
stop the cutter head in less then 3 seconds. The frame is a uni-body construction with a kickstand that will
protect the cutter head during storage and double as a guard while in use. The engine is protected by the
front bumper which also provides a strong lifting handle and tie down for transportation.
The Stump Cutter features a patented cutter head. The cutter head is set thirty degrees
off vertical to allow for smooth cutting of the stump rather then grinding the stump. The teeth are also
off-set: straight, 25 degrees, and 45 degrees for the smoothest cutter available.
There is still easy access to the cutter head for quick sharpening or replacement.
The handle bars have a height adjustment to allow for differences in operators heights and size of the stump.
From the creators of the small stump cutter category, the new MacKissic Merry Commercial Mini Stump
Cutter continues the tradition of making stump grinding easy.
Stump Cutter action, like its big brother, the Mini’s unique operator position allows the user to see the stump
and cutter head at all times during operation. The cutter head orientation provides smooth stump removal
rivaled only by its big brother. Unlike other stump cutters that impair the operator’s view, the ability to see
the work in progress makes for faster and safer stump removal. Our product category exclusive braking
system stops the cutter head in less than three seconds
Model CPSC82HMC
Engine Honda GX240 Commercial
Engine CC’s 242
Cutter Head Patented tongue and groove system
Cutter Teeth Resharpenable carbide
Cutter Brake Stops in 3 seconds
Wheel Brake 6″ disc w/ mechanical caliper
Cutter Shaft Bearings 1-3/16″ w/ grease fitting
Tires 13″ pneumatic
Start Manual
Weight (lbs.) 305
Height 41″
Width 25″
Lenght Front 73″
Length Rear 88″
4HR-$75
DAY-$90
24HR-$125
FOR EXTENDED PERIOD RATES, PLEASE CALL OUR EQUIPMENT RENTAL DEPARTMENT
9HP Walk Behind Blower
4HR-$55
DAY-$70
24HR-$85
Optimax
Advanced impeller and aerodynamic design produce the highest airflow in the industry
Unique split-stream air deflector moves piles of leaves farther and faster; without blow-back!
Large, square discharge chute is low to the ground for better blowing power
Scrolled housing ensures consistent, constant airflow even if partially blocked by leaves
Continuously welded all-steel impeller and housing for strength and durability you can rely on season after season
Remote discharge chute control on the handle at your fingertips
Ergonomic handle design; height adjustable with anti-vibration grip
Transport bracket for convenient tie-down during transport.
Convenient lift handle makes lifting the blower on and off the truck easier.
Optional Swivel Wheel Kit for 360° turning
Engine Honda GX270 Subaru EX27
Displacement 270cc 265cc
Fuel Capacity 1.4 Gal. 1.6 Gal.
Air Cleaner type Dual Element Dual Element
Low Oil Sensor Standard Standard
Impeller (diameter, type ) 17″, 7 blade steel, reverse angle 17″, 7 blade steel, reverse angle
Impeller depth 2.75″ 2.75″
Discharge Chute Area 25.8 sq ” 25.8 sq ”
Air Volume 2260 cfm 2260 cfm
Air Speed 153 mph 143 mph 143 mph
Integrated Front Discharge Yes Yes
Throttle Control Remote Remote
Air Flow Control Remote Remote
Dimensions
(Height, Width, Length) 43″ x 28″ x 56″ 43″ x 28″ x 58″
Tires, Front 10″ pneumatic front tire w/ tube
Tires, Rear 12″ pneumatic rear tires w/ tube
Handle Ergonomic 2-position adjustable; anti-vibration grip
Transport Bracket Yes Yes
Lift Handle Yes Yes
Housing Continuously-welded steel; 1 piece engine deck
Weight 142 lbs 140 lbs
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Stihl BR600 Blower
4HR-$40
DAY-$50
24HR-$60
With its powerful, fuel-efficient engine, the BR 600 sets the standard for professional-grade blowers. It produces one of the highest air volume and velocity of the backpack blowers, yet features a low-emission engine, making it a great choice in both urban and rural areas. No matter where the job takes you, the BR 600
blower is the ideal choice for heavy-duty cleanup.
1 Gallon of mixed fuel is provided with this rental
DISPLACEMENT 64.8 cc (3.95 cu. in.)
ENGINE POWER 2.8 kW (3.8 bhp)
WEIGHT 9.8 kg (21.6 Ibs.)
FUEL CAPACITY 1400 cc (47.3 oz.)
BLOWING FORCE* 32 Newtons
AVG. AIR VELOCITY** 89 m/sec. (199 mph)
MAX. AIR VELOCITY** 106 m/sec. (238 mph)
AIR VOLUME AT NOZZLE** 1150 m3/h (677 cfm)
SOUND PRESSURE RATING** 75 dB(A)
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
26 Inch Brush Cutter
4HR-$70
DAY-$90
24HR-$105
Make quick work of under-brush, berries, saplings, bramble, vines, tall grass and small trees! The Outback® BC26 can cut saplings up to 2′ wide and brush 6′ tall – all at a rate of just under an acre of brush per hour.
The BC26 has a 26″ wide deck with higher tip speed for improved speed and cut quality. This nature-taming performer comes standard with a Tuff Torq™ hydrostatic transmission featuring fully automatic Enhanced Traction Control (ETC ), offering superior traction in wet or uneven conditions. Engineered to glide over uneven terrain, the pivoting brush deck hugs the ground for a better cut. This minimizes scalping and improves traction by keeping the weight of the machine on its drive wheels. (Honda engine version can handle up to 20-degree slopes
Ergonomically-angled plow-style handles with padded grips offer comfort and protection. Never take your hands off the machine to shift gears with conveniently located controls.
Step up to the Billy Goat Outback BC26 and dramatically improve your productivity.
SPECS
Engine Brand Honda
Displacement (cc) 390
Start Pull
Cut Width (in) 26
Cut Height (in) 3.75
Weight (lbs) 317
Length (in) 83
Width (in) 31
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Poly Push Lawn Roller
4HR-$15
DAY-$20
24HR-$25
18 in. x 24 in. 270 lb. Combination Push Poly Lawn Roller
Easy to push
Holds up to 270 lbs. of sand or water
Rugged steel design with rounded ends to prevent damage to lawn
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT