Poly Push Lawn Roller
4HR-$15
DAY-$20
24HR-$25
18 in. x 24 in. 270 lb. Combination Push Poly Lawn Roller
Easy to push
Holds up to 270 lbs. of sand or water
Rugged steel design with rounded ends to prevent damage to lawn
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Related Products
5′ Brush Cutter
Description
The RCR12 Series is an economically-priced Rotary Cutter, capable of cutting 1″ diameter material and
is ideal for daily use in small lots and hobby farm grass maintenance. These cutters offer fast, clean,
dependable mowing and have been extensively tested to ensure operating safety. High blade tip
speeds assure a clean cut in a variety of field conditions. The standard stump jumper slides over stumps,
rocks and debris and safety guards protect you and your property
Surpassed rugged industry standards
All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures
specified by ANSI.
Tractor HP range 18 – 60 HP
Cat. 3 driveline with shearbolt, Shear bolt offers maximum driveline protection.
Cat. 3 driveline with 2-plate slip-clutch Slip-clutch driveline offers convenience for continual work.
Floating top link Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole
position to allow greater lift leverage for smaller tractors.
Round back design Helps discharge grass better than enclosed or partially enclosed cutters.
1 1/4″ – 10″ Cutting Height Cutting height for wide range of cutting conditions.
1/2″ x 3″ Heat-treated free swinging blades Free swinging protects from obstructions. Heat-treated
offers longer life.
Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output
shaft.
10 Gauge stump jumper Allows cutter to slide over obstructions protecting the gearbox output shaft.
High blade tip speed Ensures clean cut.
Laminated tailwheel Laminated material is long lasting in rough conditions and can’t go flat.
Heavy-duty spindle on tailwheel 1 1/4″ spindle gives the strength to protect tailwheel assembly
4HR-$99
DAY-$99
24HR-$120
THE MINIMUM RATE FOR THIS ITEM IS DAY
THE RATE OF THIS ITEM WILL BE ADDED TO TRACTOR RENTAL
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
9HP Walk Behind Blower
4HR-$55
DAY-$70
24HR-$85
Optimax
Advanced impeller and aerodynamic design produce the highest airflow in the industry
Unique split-stream air deflector moves piles of leaves farther and faster; without blow-back!
Large, square discharge chute is low to the ground for better blowing power
Scrolled housing ensures consistent, constant airflow even if partially blocked by leaves
Continuously welded all-steel impeller and housing for strength and durability you can rely on season after season
Remote discharge chute control on the handle at your fingertips
Ergonomic handle design; height adjustable with anti-vibration grip
Transport bracket for convenient tie-down during transport.
Convenient lift handle makes lifting the blower on and off the truck easier.
Optional Swivel Wheel Kit for 360° turning
Engine Honda GX270 Subaru EX27
Displacement 270cc 265cc
Fuel Capacity 1.4 Gal. 1.6 Gal.
Air Cleaner type Dual Element Dual Element
Low Oil Sensor Standard Standard
Impeller (diameter, type ) 17″, 7 blade steel, reverse angle 17″, 7 blade steel, reverse angle
Impeller depth 2.75″ 2.75″
Discharge Chute Area 25.8 sq ” 25.8 sq ”
Air Volume 2260 cfm 2260 cfm
Air Speed 153 mph 143 mph 143 mph
Integrated Front Discharge Yes Yes
Throttle Control Remote Remote
Air Flow Control Remote Remote
Dimensions
(Height, Width, Length) 43″ x 28″ x 56″ 43″ x 28″ x 58″
Tires, Front 10″ pneumatic front tire w/ tube
Tires, Rear 12″ pneumatic rear tires w/ tube
Handle Ergonomic 2-position adjustable; anti-vibration grip
Transport Bracket Yes Yes
Lift Handle Yes Yes
Housing Continuously-welded steel; 1 piece engine deck
Weight 142 lbs 140 lbs
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Classen Self-Propelled Turf Rake and Dethatcher
4HR-$55
DAY-$65
24HR-$80
Dethatch on hills and grades much easier with the fatigue-free operation of the Classen Self-Propelled Turf
Rake. Easily converts to a turf seeder, or vertical cutter. Folding handle makes it easy to transport.
• Operates forward and reverse
• Infinitely variable speed from 0 to 3.4 mph
• Makes loading and unloading on ramps a snap
• Great on hills
• Infinite speed from 0 to 3.4 mph eliminates fatigue on operator
• Folding handle for easy transportation
• 28 heat–treated flail blades with spacing of 11/16? standard adjustable up to 1–3/8?
• 5-position, single action height adjustment
• Heavy–duty, greasable bearings with cast iron housings
• Wheels have sealed bearings and semi–pneumatic tires
Dimensions 40″ H x 31.5″ W x 43.5″ L
Dimensions (handle folded) 34.5″ H x 31.5″ W x 30.5″ L
Dry Weight 215 lbs.
Engine Honda® GX160
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Classen Split Drive Aerator
MIN-$60
DAY-$80
24HR-$99
The only aerator with power steering.
• Simple controls allow you to aerate straight, follow curves and turn left or right
• Combination throttle and belt tightener for a smooth start every time
• Side bumpers prevent catching on obstacles and tire scrapes ensure consistent tine depth
• Removable weights and fillable water drum for greater tine penetration in tough soil
•Effortless end-of-row turning, aerate in tight circular areas and easily maneuver around trees, hydrants and other above ground obstacles.
• Combination throttle and belt tightener for a smooth start every time
• Protective chain guards help keep grass, leaves and cores out of chains and sprockets
Dry Weight 370 lbs.
Aerating Width 24.375″
Coverage 29,000 sq. ft. per hour
Core Depth Up to 2.75″
Tines 36 36
Hole Pattern 4.06″ x 7″ 4.06″ x 7″
Weight Bar Removable 50 lb. weight bar
Drum 9.5 gal. front poly drum
Engine Honda® GX120
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Lawn Solutions Walk Behind Aerator
MIN-$60
DAY-$80
24HR-$99
This model features a unique hydraulic drive system that provides excellent maneuverability and ease of use — no need to raise the tines to turn the machine. A wide unibody frame with 10-gauge steel construction and outboard drive wheels give this machine a low center of gravity for excellent side hill stability. Plus, it’s compact enough to get into the tightest areas and can aerate in reverse to back out. Handles fold to make transport and storage a snap. Self-cleaning tines are capable of creating plugs up to 4″ deep, depending on ground conditions.
Specifications
Aerating Depth Up to 3″ Aerating
Width 21″
Engine HONDA
Fuel Capacity 1 gallon
Ground Speed 4 mph (forward)/2.2 mph (reverse)
Height 38″ (handle folded) 46″ (handle up)
Length 48″ (handle folded) 50″ (handle up)
Weight 320 lbs. (with 1-27 lb. weight) 285 lbs. (w/out weights)
Width 31.5″
Disclaimer
All walk-behind machines comply with ANSI safety standards: B71.4 for commercial turf care equipment or
B71.8 for OPE walk-behind ground-engaging equipment.
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
7HP Walk Behind Blower
4HR-$35
DAY-$40
24HR-$45
Moves Air At 185 MPH & 1850 CFM
Clears away leaves & yard waste in no time
Much faster & easier on your back than raking
15 Inch Diameter Poly Impeller
Powerful & light weight; balanced for smooth operation
Adjustable Deflector With Kickable Handle
Divert air up, down, forward or sideways without bending over
Sturdy 3-Wheel Frame
Easy to manuever on any terrain
Adjustable loop handle with cushioned anti-vibration grip
9-Inch Pneumatic Front-Locking Swivel Wheel
2 height adjustments put the air right where it’s needed
12-inch pneumatic rear wheels provide stability & traction
Axle gussets for extra stability
Specifications
Engine
Engine Brand Briggs & Stratton
Starting System Recoil Start
Engine Cycle 4-Cycle
CC 250 CCs
Impeller
Impeller Material Composite
Impeller Size 15 Inches
Blower
Volume of Air 1850 CFM
Air Speed 185 mph
Wheels
Front Tire Size 9 Inch
Rear Tire Size 12 Inch
Tire Type Pneumatic Wheels
Overview
Weight 135 Pounds
FOR ADDITIONAL RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Stihl FS 560 C-EM Clearing Saw
24HR-$125 (THIS IS MIN RATE)
The most powerful STIHL clearing saw in its class – the FS 560 C-EM cuts through wild growth, hedges and thickets with a rugged design ideal for heavy landscape and forest cutting. Powered by a low-emission engine that is 12% more fuel-efficient than the previous model, the STIHL FS 560 C-EM clearing saw features the STIHL M-Tronic™ engine management system, which provides optimum engine power at all times and automatically adjusts to changes in elevation, temperature and air filter cleanliness. A large 33.5 oz. translucent fuel tank – 31% larger than the previous model – offers longer run times and less refueling. This clearing saw also comes standard with the Easy2Start™ system, which requires minimal pulling force to start the engine. The 4-point anti-vibration system allows optimal control while reducing fatigue, and an easy-to-adjust, soft-grip bike handle swivels for easy transport and storage.
FS 560 C-EM Specifications –
DISPLACEMENT 57.1 cc (3.48 cu. in.)
ENGINE POWER 2.8 kW (3.75 bhp)
WEIGHT* 10.2 kg (22.5 lbs.)
FUEL CAPACITY 990 cc (33.5 oz.)
POWER SOURCE Gas
*Weight without cutting attachment or deflector.
1 Gallon mixed fuel is included with this rental
Saftey kit is included with rental of this unit
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Stihl SH 86 C-E Shredder Vac
4HR-$35
DAY-$45
24HR-$55
Like a strong wind with an off switch, the STIHL SH 86 C-E professional shredder vac is a powerful landscaping tool – and it comes standard with the necessary parts to easily convert this shredder vac into a handheld blower. It features the same STIHL Easy2Start™ system as the SH 56 C-E, but delivers higher air volume and velocity for tackling difficult yard waste. The shredder vac/blower also features soft-grip handles and four-spring anti-vibration technology for greater comfort on the job. And as it shreds, the clippings accumulate in a secure, easy-open zippered bag for convenient emptying.
1 Gallon of mixed fuel included with rental
DISPLACEMENT 27.2 cc (1.66 cu. in.)
ENGINE POWER 0.8 kW (1.07 bhp)
WEIGHT 5.6 kg (12.3 lbs.)
FUEL CAPACITY 440 cc (14.9 oz.)
BLOWING FORCE* 15 Newtons
AVG. AIR VELOCITY** 63 m/sec. (141 mph)
MAX. AIR VELOCITY** 76 m/sec. (169 mph)
AIR VOLUME AT NOZZLE** 756 m3/h (444 cfm)
SOUND PRESSURE RATING** 70 dB(A)
BAG CAPACITY 1.5 cu. ft. = 1.2 bushel
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT