Showing all 29 results

1 Inch SDS Max Drill Bit
1 Inch SDS-Max Drill Bit

MIN-$10
DAY-$15
24HR-$20

Bosch HC5051 1-Inch x 16-Inch SDS Max Rotary Hammer Bit

The product is 1x16x21 SDS Max Bit
Carbide tipped bit head is harder, tougher, and more resistant to extreme loads
1″ diameter, 16″ useable length, 21″ overall length
Four chiseling faces and cutting edges double the chiseling action for more efficient drilling

This Bosch 1-inch by 16-inch flute by 21-inch SDS-Max rotary hammer drill bit offers improved performance with its carbide-tipped head with 4 cutting edges. The bit is designed to help reduce vibration when drilling. The bit shaft wears at a slower rate and better withstands repeated use.

First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)

FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
1-3/8 Inch SDS-Max Drill Bit
1-3/8 Inch SDS-Max Drill Bit

MIN-$10
DAY-$15
24HR-$20

Bosch HC5081 1-3/8 In. SDS-max

Product Description
Bosch carbide rotary hammer bits feature tips that stay sharper longer and deliver more holes within specification than competitive bits. Manufactured to ANSI specification B212.14. SDS-max rotary hammer bits fit Bosch SDS-max hammers and competitive SDS-max drive hammers and Hilti hammers using TE-Y and TE-FY shanks. Unrivaled power from solid carbide head with robust S-cutter design for added speed
and life.

Highest drilling speed with inclined side cutters provides fast concrete drilling
Compact head for fast dust removal and longer life
Active-centering tip provides quick, accurate starts
Wear mark indicator assures accuracy of hole diameter

First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)

FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
1.25 SDS Max Bit
1.25 Inch SDS-Max Drill Bit

MIN-$10
DAY-$15
24HR-$20

1-1/4 in. x 18 in. SDS-max Carbide Rotary Hammer Drill Bit for Concrete Drilling

Carbide bits feature tips that stay sharper longer
Active-centering tip provides quick, accurate starts
Inclined side cutters provides fast concrete drilling

First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)

FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
1.5 SDS Max Bit
1.5 Inch SDS-Max Drill Bit

MIN-$10
DAY-$15
24HR-$20

1-1/2 in. x 16 in. x 21 in. SDS-max Carbide Rotary Hammer Drill Bit for Concrete Drilling

1-1/2 in. x 18 in. x 21 in. Carbide Spiral SDS-MAX Rotary Hammer Drill Bit features a carbide tip to provide durability. The reduced-vibration design enables easy drilling and the 4 cutting edges offer versatility.

Suitable for use with Bosch SDS-MAX rotary hammer drills
Wild-bore multi-cutter X-head spiral drill bits offer minimal vibration
Carbide tip for durability
Includes 4 cutting edges

First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)

FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
1.75 SDS Max Bit
1.75 Inch SDS-Max Drill Bit

MIN-$10
DAY-$15
24HR-$20

1 3/4 IN SDS MAX
Product description
Bosch carbide rotary hammer bits feature tips that stay sharper longer and deliver more holes within specification than competitive bits. Manufactured to ANSI specification B212.14. SDS-max rotary hammer bits fit Bosch SDS-max hammers and competitive SDS-max drive hammers and Hilti hammers using TE-Y and TE-FY shanks. Unrivaled power from solid carbide head with robust S-cutter design for added speed
and life.

First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)

FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
10x10 Hand Tamper
10×10 Hand Tamper

This True Temper 10″ x 10″ tamper is made for heavy duty construction and industrial work! The 10.6 lb steel tamper head is perfect for tamping asphalt, gravel, stone, and dirt. The flexible ash handle is water resistant for outdoor applications.

MINIMUM RATE FOR THIS ITEM IS 24HR

MIN-$10
DAY-$10
24HR-$10

FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
12″ Tile Scraper
12″ Tile Scraper

4-Inch Strip and Clean Scraper, 12-Inch Steel Soft Grip Handle
Made of sturdy, durable plastic and rust-proof stainless steel wire; handles are molded for comfort
Perfect for removing rust, corrosion, paint, stucco, etc
The upc of the product is 048661007907
Uses #793, #794, #795 blade
Tackle big scraping jobs from paint to floor tile
Die-cast aluminum scraping heads
Maximum blade rigidity

Product Description
Made of sturdy, durable plastic and rust-proof stainless steel wire; handles are molded for comfort. Perfect
for removing rust, corrosion, paint, stucco, etc. Recycled plastic handle.

Item Weight 15.2 ounces
Product Dimensions 12 x 1 x 1 inches

4HR-$10
DAY-$10
24HR-$15

THE MINIMUM RATE FOR THIS ITEM IS DAY
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
18 gal. Shop-Vac
18 gal. Shop-Vac

Shop-Vac® 18 Gallon* 6.5 Peak HP** Hardware Wet Dry Vac

Shop-Vac®Hardware Series Wet Dry Vacs
The Shop-Vac® 18 Gallon* 6.5 Peak HP** Wet Dry Utility Vac features the SVX2® Motor Technology†.
This new motor has more power and longer motor life when compared to the Shop-Vac® standard
6.5 Peak HP** motor. Use this vacuum to clean up your workspace, basement or garage. The hose
attaches to the rear blower port allowing you to blow the dirt out of hard to reach places.

Features
Cord Length: 18 Feet
Hose Size: 2.5″ Diameter
Warranty: 4 Years
Tank Drain
Lock-On® Hose
Blower Feature
Onboard Accessory Storage

Includes
Accessories
8-foot by 2.5-inch diameter Lock-On® hose
two 2.5-inch diameter extension wands
14-inch wet/dry floor nozzle

4HR-$15
DAY-$20
24HR-$25

ITEM IS SENT OUT FOR WET RENTAL.
IF DOING DRY, CUSTOMER MUST PURCHASE FILTER FOR ITEM
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
1X12 SDS CHISEL
1×12 Inch SDS-Max Flat Chisel

MIN-$5
DAY-$10
24HR-$15

Bosch HS1911 SDS-max® Hammer Steel 12-in Flat Chisel

For concrete removal and hard surface break-up
Fits Bosch SDS-max hammers
1 In. chisel width and 12 In. long SDS-max shank
One-piece design

Product Description
Bosch offers a full assortment of SDS-max hammer steel points and chisels. This SDS-max flat chisel is highly durable and designed for extreme performance. This product uses an SDS-max shank to ensure tight grip for the toughest jobs.

Item Weight 14.4 ounces
Product Dimensions 12.5 x 1 x 1 inches

First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)

FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
1X16 SDS CHISEL
1×16 Inch SDS-Max Flat Chisel

MIN-$5
DAY-$10
24HR-$15

1 in. x 16 in. SDS Max Steel Flat Chisel

The Milwaukee 48-62-4081 SDS Max Steel Flat Chisel is ideal for chipping and channeling in concrete and other demolition work. It’s forged from high-grade steel and heat treated for strength.

Cold chisel fits tools with SDS Max chucks
Ideal for chipping and channeling in concrete and other demolition work
Forged high-grade steel construction for durability
Heat-treated work areas for strength
1 in. W x 16 in. L

First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)

FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
2 in sds max bit
2 Inch SDS-Max Drill Bit

MIN-$10
DAY-$15
24HR-$20

Patented extra strength tip for longer life
Large flute volume for fast drilling dust transport and less clogging
Narrow flute back for reduced friction between bit and material
Creates true round holes for anchors
Diameter is 2 inches with 16 inches usable length. Total length is 21 inches.

First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)

FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
2 5-8 SDS CORE
2-5/8 Inch x 22 Inch SDS-Max Core Bit

4HR-$25
DAY-$30
24HR-$35

HC8526
2-5/8 In. x 22 In. SDS-max® Rotary Hammer Core Bit

Description
Bosch SDS-max® carbide-tipped rotary hammer core bits offer an integral shank for better power
transmission. Bosch SDS-max® rotary hammer core bits with wave design go beyond the range of standard
bits and allow smaller hammers to drill larger holes. Wave design transfers energy to bit more effectively for
up to 40 percent faster drilling versus previous design.

Benefits
Wave design transfers energy to bit more effectively for up to 40 percent faster drilling versus previous design
Carbide-tipped centering bit
Asymmetrical carbide teeth for faster cutting, longer life
All-in-one core transmits power directly to the end of the bit
Maximum core size is 2-5/8 In. deep

Specifications
Attributes
Description N/A
Diameter 2-5/8″
Length 22.0″
Overall Length 22.0
Shank Diameter 0.0
Useable Length 17″

First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)

FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
2X14 SDS CHISEL
2×14 Inch SDS-Max Scaling Chisel

MIN-$5
DAY-$10
24HR-$15

HS1917 2 In. x 14 In. Scaling Chisel SDS-max® Hammer Steel

PRODUCT DESCRIPTION
Description
Bosch R-Tec technology for SDS-max® chisels use an energy-diverting reflection element that increases material removal by 15%. Because the energy is dispersed back into the work material, the tool and bit do more of the work with less vibration for the user. The R-Tec chisel features a unique cutting head with extra wedges for increased breakout.

Benefits
For light chipping and chiseling of tile, mortar, glazing compounds and other masonry products
Shank 1/2 In.
For use with SDS-max® hammers
Length 14 In.

Specifications
Attributes
Description Scaling chisel, self-sharpening
Flute Length 0.0
Length 14.0″
Quantity 1
Shank Diameter 0.0
Size 2″ x 14″

First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)

FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
3 1-4 SDS CORE
3-1/4 Inch x 22 Inch SDS-Max Core Bit

MIN-$25
DAY-$30
24HR-$35

HC8536
3-1/4 In. x 22 In. SDS-max® Rotary Hammer Core Bit

Description
Bosch SDS-max® carbide-tipped rotary hammer core bits offer an integral shank for better power transmission. Bosch SDS-max® rotary hammer core bits with wave design go beyond the range of standard bits and allow smaller hammers to drill larger holes. Wave design transfers energy to bit more effectively for up to 40 percent faster drilling versus previous design.

Benefits
Wave design transfers energy to bit more effectively for up to 40 percent faster drilling versus previous design
Carbide-tipped centering bit
Asymmetrical carbide teeth for faster cutting, longer life
All-in-one core transmits power directly to the end of the bit
Maximum core size is 2-5/8 In. deep

Specifications
Attributes
Description N/A
Diameter 3-1/4″
Length 22.0″
Overall Length 22.0
Shank Diameter 0.0
Useable Length 17″

First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)

FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
3X12 SDS CHISEL
3×12 Inch SDS-Max Scaling Chisel

MIN-$5
DAY-$10
24HR-$15

HS1910
3 In. x 12 In. Scaling Chisel SDS-max® Hammer Steel

PRODUCT DESCRIPTION
Description
Bosch offers a full assortment of SDS-max® hammer steel points and chisels. Bosch brings constant innovation
to concrete and masonry drilling with increased effeciency and higher durability. All Bosch chisels are
manufactured with a proprietary heat-treat process.

Benefits
Hardened steel bits for use with SDS-max® hammers
For light chipping and chiseling of tile, mortar, glazing compounds and other masonry products
Ideal for removing large quantities of material
Wide chisel design for quick and easy chiseling and breaking

Specifications
Attributes
Description Scaling chisel
Length 12.0″
Quantity 1
Size 3″ x 12″

First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)

FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
48″ Tile Scraper
48″ Tile Scraper

4-Inch Strip and Clean Scraper, 48-Inch Steel Handle
Uses # 93, #794, #795 blade
Tackle big scraping jobs from paint to floor tile
Die-cast aluminum scraping heads
Maximum blade rigidity

Product Description
This is strip ‘n’ clean scraper and blades. This product adds a great quality. Easy to use and handle.

4HR-$15
DAY-$15
24HR-$20

THE MINIMUM RATE FOR THIS ITEM IS DAY
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
4 IN SDS CORE
4×22 Inch SDS-Max Core Bit

MIN-$25
DAY-$30
24HR-$35

HC8555
4 In. x 22 In. SDS-max® Rotary Hammer Core Bit

Description
Bosch SDS-max® carbide-tipped rotary hammer core bits offer an integral shank for better power transmission. Bosch SDS-max® rotary hammer core bits with wave design go beyond the range of standard bits and allow smaller hammers to drill larger holes. Wave design transfers energy to bit more effectively for up to 40 percent faster drilling versus previous design.

Benefits
Wave design transfers energy to bit more effectively for up to 40 percent faster drilling versus previous design
Carbide-tipped centering bit
Asymmetrical carbide teeth for faster cutting, longer life
All-in-one core transmits power directly to the end of the bit
Maximum core size is 2-5/8 In. deep

Specifications
Attributes
Description N/A
Diameter 4″
Length 22.0″
Overall Length 22.0
Shank Diameter 0.0
Useable Length 17″

First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)

FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
5′ Brush Cutter
5′ Brush Cutter

Description
The RCR12 Series is an economically-priced Rotary Cutter, capable of cutting 1″ diameter material and
is ideal for daily use in small lots and hobby farm grass maintenance. These cutters offer fast, clean,
dependable mowing and have been extensively tested to ensure operating safety. High blade tip
speeds assure a clean cut in a variety of field conditions. The standard stump jumper slides over stumps,
rocks and debris and safety guards protect you and your property

Surpassed rugged industry standards
All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures
specified by ANSI.
Tractor HP range 18 – 60 HP
Cat. 3 driveline with shearbolt, Shear bolt offers maximum driveline protection.
Cat. 3 driveline with 2-plate slip-clutch Slip-clutch driveline offers convenience for continual work.
Floating top link Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole
position to allow greater lift leverage for smaller tractors.
Round back design Helps discharge grass better than enclosed or partially enclosed cutters.
1 1/4″ – 10″ Cutting Height Cutting height for wide range of cutting conditions.
1/2″ x 3″ Heat-treated free swinging blades Free swinging protects from obstructions. Heat-treated
offers longer life.
Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output
shaft.
10 Gauge stump jumper Allows cutter to slide over obstructions protecting the gearbox output shaft.
High blade tip speed Ensures clean cut.
Laminated tailwheel Laminated material is long lasting in rough conditions and can’t go flat.
Heavy-duty spindle on tailwheel 1 1/4″ spindle gives the strength to protect tailwheel assembly

4HR-$99
DAY-$99
24HR-$120

THE MINIMUM RATE FOR THIS ITEM IS DAY
THE RATE OF THIS ITEM WILL BE ADDED TO TRACTOR RENTAL
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
5-8 SDS MAX BIT
5/8 Inch SDS-Max Drill Bit

MIN-$10
DAY-$15
24HR-$20

Bosch HC5020 5/8-Inch SDS Max Rotary Hammer Bit

Highest drilling speed with inclined side cutters provides fast concrete drilling
Compact head for fast dust removal and longer life
Active-centering tip provides quick, accurate starts
Wear mark indicator assures accuracy of hole diameter
Carbide tipped bit head is harder, tougher, and more resistant to extreme loads
Four chiseling faces and cutting edges double the chiseling action for more efficient drilling
Diameter is 5/8-inch

Product Description
Bosch carbide rotary hammer bits feature tips that stay sharper longer and deliver more holes within
specification than competitive bits. Manufactured to ANSI specification B212.14. SDS-max rotary hammer
bits fit Bosch SDS-max hammers and competitive SDS-max drive hammers

First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)

FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
55lb Spreader
55lb Spreader

Product description
Walk behind spreader with Poly hopper (55lb. Capacity)

Product information
Package Dimensions 20.9 x 17.4 x 13 inches
Item Weight 19.4 pounds
Shipping Weight 19.4 pounds
Manufacturer Spyker

4HR-$10
DAY-$10
24HR-$15

THE MINIMUM RATE FOR THIS ITEM IS DAY
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Carpet Fan
Carpet Fan

Dry carpet, hard floors and other surfaces with Tennant’s durable and travel friendly Blower, with three fan
speeds and 2,500 cfm / 713 airflow.

Blower Features and Benefits
Dry areas quickly with this compact, three-speed Blower:
Dry carpet, hard floors, fresh paint, concrete sealer, and more, quickly and efficiently
Ensure durability and years of use with this industrial blower’s rotational-mold body
Direct air flow where you need it to dry almost any surface
Key machine features of the Blower:
2,500 cfm / 71 m3/min of airflow dries surfaces quickly with the fan’s three different speeds
Stackable blower frees up valuable space in closets and transport vehicles for convenient storage

MIN-$25
DAY-$30
24HR-$35

FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Coil Nailer
Coil Nailer

Features
Innovative firing valve – reduces air consumption without compromise on power or speed
Bi-metal driver blade reduces wear and improves durability
Power in, power out feed system – improves speed and delivers consistent drives

Tool Weight: 5.2 lbs (2.35 kgs)
Height: 10 7/8″ (276 mm)
Length: 10 5/8″ (269 mm)
Width: 4 1/2″ (114 mm)
Technology: Pneumatic
Trigger Type: Contact Actuation
Operating Pressure: 70 – 120 (PSI)
Operating Pressure: 4.8 – 8.3 (Bar)
Air Consumption: 3.86 (SCFM)
Air Inlet NPT: 1/4″
Capacity: 120
Power Type: Pneumatic
Range: 3/4″ – 1 3/4″

Minimum Rate for this item is the Day Rate

4HR-$20
DAY-$20
24HR-$30

FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Dri-Eaz
Dri-Eaz

Product Features
LGR technology boosts effective operating range
Compact size – only 92 pounds
Draws only 5 amps – but removes 70 pints at AHAM
Quick pump access for easy servicing
New, rigid fold-down handle
Improved quick-release hose wrap design
Built-in ring for easy attachment of ducting
If power is interrupted during operation, the unit will automatically restart when power is restored.
(115V models only.)

Product Specifications

Model F292
Type Low Grain Refrigerant
Dimensions (H × W × D) 33.5 × 20.7 × 20.7 in.
Weight 92 lbs. | 42 kg
Water Removal Max (90°F/90% RH) 143 pints | 67.7 liters /day
Water Removal AHAM (80°F/60% RH) 70 pints | 33 liters /day
Operating Range 33° – 100°F
1° – 38°C
Compressor Type 5,595 Rotary
Defrost Type Hot-gas bypass
Process Air 160 CFM
Controls Touchpad
Hour Meter Yes
Condensate Pump Centrifugal
Drain Hose Length 40 foot
Air Filter High Air Flow
Wheels Semi-pneumatic
Handle Steel, fold-down
Housing Rotomolded polyethylene
Power 115 V 5 amps
Cord Length 25 foot

MINIMUM RATE FOR THIS ITEM IS THE DAY RATE

MIN-$70
DAY-$70
24HR-$80

FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Drywall Stilts
Drywall Stilts

Product features
Better fit resulting in smoother action and less wobble
High strength aluminum alloy allows for strong working parts and light weight (6 lbs 4 oz ea.)
Light Weight Aluminum Construction – Offers a one pound weight differential over other stilts
Adjustable from 18″ to 30″ to accommodate most working heights
Product description
If you are in the market for a set of drywall stilts, stop looking! Pentagon tool is an industry leader in drywall
supplies and accessories. They sell more lifts, stilts, and accessories than most other sellers combined. You
are bidding on a set of new premium grade drywall stilts. They are perfect for drywall painting, electrical,
drop ceilings, and many other applications. These are made of premium grade aluminum Alloy and are
backed up. The exclusive Wing bolt design offers flexibility and versatility you can adjust the Height without
tools. In our Opinion, these are the lightest, safest, and most durable set of stilts on the market in this price
range. You will not be disappointed. Features include: better fit resulting in smoother action and less
wobble in our new improved Nylon leg adjustment sleeves. High strength aluminum Alloy allows for strong
working parts and lightweight (6 lbs 4 oz EA.). Lightweight aluminum construction – offers a one pound
weight Differential over other stilts. Adjustable from 18 inch to 30 inch to accommodate most working
heights. 228 lbs load capacity. Dual Spring action allows flexibility and prevents legs from sliding. Premium
grade rubber soles prevent slipping. Adjustable leg bands with pads provide added comfort. Adjustable
heel plates and foot straps – include self-locking metal buckles. Recommended for professionals! new Wing
bolt design enables you to adjust the Height without tools.

4HR-$15
DAY-$20
24HR-$25

FOR EXTENDED PERIOD RATES, PLEASE CALL OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Duraheater
Duraheater

DESCRIPTION
Duraheat, 220,000 btu, kerosene portable forced air heater with dual heat technology, 180,000 btu on low, 220,000 btu on high, commercial grade, heats up to 5,300 sq ft, includes digital diagnostics & led temperature indicator, flat free cold weather tires, built in thermostat, 13 gallon fuel tank, 650 cfm, run time fuel gauge, on/off switch, 1 touch ignition, built in air pressure gauge, auxiliary power outlet, threaded axle system, 1 touch electronic start, extension cord wrap, dual lift handles & convenient drain plug, includes ul listed large capacity motors & fuse protected electrical system, all components are securely fastened into chassis to insure long life, utilizes heavy duty spark technology for in field endurance, multi-fuel capable, has been factory tested to operate with 1k kerosene

220,000 Btu’s
Dual Heat Settings (180 – low / 220 – high) allows set-back of btu output to minimize fuel consumption and
extend operating time
Integral auxiliary power outlet
Large capacity 13 gallon fuel tank
Built-in air pressure gauge
Extension cord wrap
Digital diagnostics and LED temperature indicator
10″ flat-free cold weather tires
Tank drain plug
650 CFM
Operates up to 10 hours on one tankful

SPECIFICATIONS
Product Weight (pounds): 68.3
Package dimensions (inches)
Length: 42.5
Width: 18.1
Height: 20.7
Assembled, or out-of-package, dimensions (inches)
Length: 41.81
Width: 23.11
Height: 26.14

MINIMUM RATE FOR THIS ITEM IS THE DAY RATE

MIN-$35
DAY-$35
24HR-$50

FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Finishing Nail Gun
Finishing Nail Gun

Product Information
This Senco ‘FinishPro’ Finishing Nail Gun fires C Series Brads up to 63mm. They are ideal for cabinet making, interior trim, bookshelves, chair rails, crown mouldings & much more. They are well balanced, strong but light which makes them suitable for extended industrial use. They feature an adjustable exhaust, adjustable depth drive plus an ‘EZ Clear’ magazine for clearing nail jams quickly. Complete with a carry case, oil & fitting.
Senco ‘FinishPro’ Finishing Gun
Adjustable Exhaust
EZ-Clear Magazine
Adjustable Depth Of Drive
Fasteners Type – C Series Brads
Range 32mm-63mm
Capacity 120 Brads
Uses 16 gauge nails, 1 1/4 to 2 1/2 length

THE DAY RATE IS THE MINIMUM ON THIS RENTAL ITEM

4HR-$20
DAY-$20
24HR-$30

FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Framing Nailer
Framing Nailer

34° FramePro®701XP
3 1/2″ Paper Taped Framing Nailer
Applications
Framing, Sheathing, Sub-flooring, Crate, Pallet & Truss Assembly
Features
Straight-line 34° magazine for better line of sight.
Simple two-step loading.
Aggressive toenail safety.
Fits easily between studs and joists.

Specifications
Tool Weight: 8 lbs (3.62 kgs)
Height: 13 1/4″ (337 mm)
Length: 15 1/8″ (384 mm)
Width: 4 3/16″ (106 mm)
Technology: Pneumatic
Trigger Type: Sequential Actuation
Operating Pressure: 70 – 120 (PSI)
Operating Pressure: 4.8 – 8.3 (Bar)
Air Consumption: 10 (SCFM)
Air Inlet NPT: 3/8″
Capacity: 70
Power Type: Pneumatic
Range: 2″ – 3 1/2″

Minimum Rate for this item is the Day Rate

4HR-$35
DAY-$35
24HR-$45

FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Push Spreader 120lb
Push Spreader 120lb

The Spyker Pro-Series S60-12020 Commercial Broadcast Spreader is the right walk-behind spreader for the
job. Its large 120 lb. poly hopper lets you cover more ground between fill-ups so you can get more done in
less time. Affectionately called the “Mulch-N-More” because of its extra-large single port opening, the
S60-12020 will work with larger materials such as pin mulch and rock salt.

The design of the S60-12020 enables it to project better spread coverage while maintaining perfect
equilibrium using the on-the-fly Accu-Way™ adjustment cable. The Accu-Way™ adjusts the material flow
forward or backward, which determines how quickly the granules launch off of the spinner/fan. This allows
the operator to maintain a perfectly balanced spread pattern regardless of the chosen material.

Features of Spyker Spreader S60-12020 (Mulch & More)
120 lb. (55kg) Poly Hopper Capacity
One-Piece Welded Stainless Steel Frame
5/8” Solid Stainless Steel Axle
13” x 5” Pneumatic Tires
Positive On/Off System – No Cables
Patented Split-shaft Design for Easy Calibration
Oversized Single-gate Opening

4HR-$15
DAY-$15
24HR-$20

THE MINIMUM RATE FOR THIS ITEM IS DAY
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Westpointe Dehumidifier
Westpointe Dehumidifier

DESCRIPTION
Westpointe, 30 PT, Dehumidifier, Modern White Design, 115V, 3A, 3 Prong Plug,
Approximate Coverage: 500 SQFT, Electronic Control Panel, Low Operating Temperature, With Convenient Bucket Full Indicator Light, New Energy Star Rated, 24 Hour Timer, 250 Hour Filter Wash Remind, Adjustable Thermostat, 2 Speed Fan Control, Auto Shut Off, Continuous Drain Mode With External Drain, 4 Easy Roll Casters, Uses Eco Friendly R410A Refrigerant, 31 LB, Dimensions: 14.17″W x 20.08″H x 10.28″D.

SPECIFICATIONS
Product Weight (pounds): 32.0
Package dimensions (inches)
Length: 15.2
Width: 10.2
Height: 19.7

MINIMUM RATE FOR THIS ITEM IS THE DAY RATE

MIN-$15
DAY-$15
24HR-$20

FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more