Dehumidifier, Small
Rated to remove 40 pints per day in average operating conditions.
Unit features auto an shutoff when holding tank is full, and must be checked and dumped periodically.
Water Removal Max: @ 90°F/90% RH* ~ 80 pints/day
Water Removal AHAM:** @ 80°F/60% RH* – 40 pints/day
Min Operating Temp: 50° F
Weight: 32 lbs.
*Relative Humidity
**Association of Home Appliance Manufacturers average operational conditions of 80°F/60% RH
FOR RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Related Products
Wet Tile Saw, 12″
Rip Cut capacity: 14″
Diagonal Cut capacity: 10″
Depth of Cut: 2″
Blade Size: 7″
Weight 48 lbs.
Folding stand included w/ rental.
FOR RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Torpedo Heater, Kerosene
Kerosene Job-site torpedo heater.
This unit is for outdoor use ONLY!
Requires electricity to operate!
Output Rating: 170,000 BTU
Fuel Tank Capacity: 13.5 Gallons
Fuel Consumption: 1.25 Gallons per hour
Weight without Fuel: 75 lbs
Use in extreme cold temperatures may require nontoxic anti-icer additives.
FOR RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Dehumidifier, Commercial LGR
Rated to remove 70 pints per day in average operating conditions.
Unit features an automatic drain pump, simply route drain hose to suitable location and the machine will drain every 6 minutes! Turn unit on and leave it alone till the job is done!
Low Grain Refrigerant technology boosts effective operating temperature range.
Weight: 92 lbs.
Water Removal Max: @ 90°F/90% RH* – 143 pints/day
Water Removal AHAM:** @ 80°F/60% RH* – 70 pints/day
Operating Range: 33° – 100°F
*Relative Humidity
**Association of Home Appliance Manufacturers average operational conditions of 80°F/60% RH
FOR RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Framing Nailer
The Paslode F350-S is ideal for professional framing work.
Fastener Specs: 2″ to 3-1/2″ 30° clipped and full-head paper-tape nails with .113″-.131″ diameters
Operating Pressure: 80-120 PSI
FOR RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Roofing Coil Nailer
Operating Pressure: 70 – 100 PSI
Fastener Specs: 3/4″ – 1 3/4″ 15° Wire weld coiled roofing nails.
Weight: 5.2 lbs
FOR RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Flooring Stapler, Pre-finished
The lightweight tongue-and-groove installation stapler drives perfect 45° angle staples every time and eliminates tongue splitting and floor surface damage. Adjusts to different floor thicknesses.
Flooring Thickness Range: .25″ – .50″
Fastener Specs: 3/16″ Crown 19 Gauge Medium Wire Staples
Operating Pressure: 70 – 120 PSI
FOR RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Flooring Nailer
BOSTITCH MIIIFN
For solid and engineered hardwood flooring. High-speed mallet actuated pneumatic operation. Adjustable via shims for flooring from .50″ to .75″ in thickness.
Flooring Thickness Range: .50″ – .75″
Fastener Specs: 1.5″ – 2″ Cleat Nails.
Operating Pressure: 70-90 PSI
Pneumatic operation rapidly drives nails into both unfinished and pre-finished hardwood flooring, and its long-grip handle allows you to maintain a comfortable posture when working.
A manual strike with supplied mallet activates the firing action.
FOR RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT