Framing Nailer
34° FramePro®701XP
3 1/2″ Paper Taped Framing Nailer
Applications
Framing, Sheathing, Sub-flooring, Crate, Pallet & Truss Assembly
Features
Straight-line 34° magazine for better line of sight.
Simple two-step loading.
Aggressive toenail safety.
Fits easily between studs and joists.
Specifications
Tool Weight: 8 lbs (3.62 kgs)
Height: 13 1/4″ (337 mm)
Length: 15 1/8″ (384 mm)
Width: 4 3/16″ (106 mm)
Technology: Pneumatic
Trigger Type: Sequential Actuation
Operating Pressure: 70 – 120 (PSI)
Operating Pressure: 4.8 – 8.3 (Bar)
Air Consumption: 10 (SCFM)
Air Inlet NPT: 3/8″
Capacity: 70
Power Type: Pneumatic
Range: 2″ – 3 1/2″
Minimum Rate for this item is the Day Rate
4HR-$35
DAY-$35
24HR-$45
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Related Products
1.25 Inch SDS-Max Drill Bit
MIN-$10
DAY-$15
24HR-$20
1-1/4 in. x 18 in. SDS-max Carbide Rotary Hammer Drill Bit for Concrete Drilling
Carbide bits feature tips that stay sharper longer
Active-centering tip provides quick, accurate starts
Inclined side cutters provides fast concrete drilling
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
1.75 Inch SDS-Max Drill Bit
MIN-$10
DAY-$15
24HR-$20
1 3/4 IN SDS MAX
Product description
Bosch carbide rotary hammer bits feature tips that stay sharper longer and deliver more holes within specification than competitive bits. Manufactured to ANSI specification B212.14. SDS-max rotary hammer bits fit Bosch SDS-max hammers and competitive SDS-max drive hammers and Hilti hammers using TE-Y and TE-FY shanks. Unrivaled power from solid carbide head with robust S-cutter design for added speed
and life.
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Flooring Nailer
BOSTITCH MIIIFN
1-1/2-inch to 2-inch pneumatic flooring nailer for driving L-shaped flooring cleats
High-speed; extra-wide composite base; high-capacity magazine; 420 inch-pounds of driving power
Constructed of aircraft-grade aluminum
Includes rubber-tipped mallet
17-1/4 by 3-1/8 by 11-1/2; 11.2 pounds
Product Description
For solid and engineered hardwood flooring. High-speed mallet actuated pneumatic operation. Extra-wide composite base plate for added stability. Long reach handle for improved comfort and control. Specs: Height: 11.5″; Length: 17.25″; Width: 3.13″;
Weight: 11.2 lbs;
Driving Power: 420 Inch Lbs;
Operating Pressure: 70-90 PSI;
Thread Fitting Type: 3/8″ NPT;
Magazine Capacity: 110 Cleats.
Fastener Specifications: Drives 1-1/2 to 2″ Cleat Nails.
The Bostitch MIIIFN Pneumatic Flooring Cleat Nailer lets you create professional-looking floors quickly and
comfortably. Its high-speed pneumatic operation rapidly drives nails into both unfinished and pre-finished
hardwood flooring, and its long-grip handle allows you to maintain a comfortable posture when working.
Tackling prefinished flooring is no problem with the included adapter foot and the extra-wide base plates
that drive staples exactly where you want them.
The Bostitch Pneumatic Flooring Cleat Nailer At a Glance:
420 in./lbs. of driving power
High-speed, mallet-actuated operation
Extra-wide base plate for stability and control
Ergonomic design with elongated handle
1.5″ to 2.0″ L-shaped cleats are ideal for installing hardwood flooring.
Adaptor foot and FloorGuard graphite mallet provide stability and control.
Interchangeable base plates help you drive cleats at the proper angle and depth.
All the Power You Need to Get Jobs Done Quickly
Harness the power of compressed air and complete your flooring jobs quickly and easily. Just connect the
Bostitch MIIIFN Pneumatic Flooring Cleat Nailer to your air compressor for 420 in/lbs of impact at 70-120 PSI.
A manual strike will activate the firing action with a lightweight FloorGuard graphite mallet, and a 110-cleat
magazine will keep you working without interruption.
Comfortable Design Keeps You in Control
Ergonomically designed for ease of use, the MIIIFN features an elongated handle that lets you work in a
natural, comfortable position. For control, the extra-wide 1/2- and 3/4-inch interchangeable base plates sit
flush against floor boards for stability, so you can drive cleats at the proper angle and depth every time.
Additionally, a pre-finished floorboard adapter foot won’t scuff or scratch floors during installation for a
professional-grade look.
Lightweight, Durable Construction for Everyday Use
The MIIIFN Pneumatic Flooring Cleat Nailer’s lightweight body and graphite FloorGuard mallet make this tool
comfortable enough to wield all day without fatigue. Built for durability, this nailer will withstand the wear
and tear of any jobsite.
The Bostitch MIIFN Pneumatic Flooring Cleat Nailer measures 3.13 x 11.5 x 17.25 inches (WxHxL) and weighs
11.2 pounds.
Refer to your flooring recommendations for fastening tool
MINIMUM RATE FOR THIS ITEM IS DAY RATE
MIN-$45
DAY-$45
24HR-$50
FOR EXTENDED PEROID RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
5/8 Inch SDS-Max Drill Bit
MIN-$10
DAY-$15
24HR-$20
Bosch HC5020 5/8-Inch SDS Max Rotary Hammer Bit
Highest drilling speed with inclined side cutters provides fast concrete drilling
Compact head for fast dust removal and longer life
Active-centering tip provides quick, accurate starts
Wear mark indicator assures accuracy of hole diameter
Carbide tipped bit head is harder, tougher, and more resistant to extreme loads
Four chiseling faces and cutting edges double the chiseling action for more efficient drilling
Diameter is 5/8-inch
Product Description
Bosch carbide rotary hammer bits feature tips that stay sharper longer and deliver more holes within
specification than competitive bits. Manufactured to ANSI specification B212.14. SDS-max rotary hammer
bits fit Bosch SDS-max hammers and competitive SDS-max drive hammers
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Finishing Nail Gun
Product Information
This Senco ‘FinishPro’ Finishing Nail Gun fires C Series Brads up to 63mm. They are ideal for cabinet making, interior trim, bookshelves, chair rails, crown mouldings & much more. They are well balanced, strong but light which makes them suitable for extended industrial use. They feature an adjustable exhaust, adjustable depth drive plus an ‘EZ Clear’ magazine for clearing nail jams quickly. Complete with a carry case, oil & fitting.
Senco ‘FinishPro’ Finishing Gun
Adjustable Exhaust
EZ-Clear Magazine
Adjustable Depth Of Drive
Fasteners Type – C Series Brads
Range 32mm-63mm
Capacity 120 Brads
Uses 16 gauge nails, 1 1/4 to 2 1/2 length
THE DAY RATE IS THE MINIMUM ON THIS RENTAL ITEM
4HR-$20
DAY-$20
24HR-$30
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
2×14 Inch SDS-Max Scaling Chisel
MIN-$5
DAY-$10
24HR-$15
HS1917 2 In. x 14 In. Scaling Chisel SDS-max® Hammer Steel
PRODUCT DESCRIPTION
Description
Bosch R-Tec technology for SDS-max® chisels use an energy-diverting reflection element that increases material removal by 15%. Because the energy is dispersed back into the work material, the tool and bit do more of the work with less vibration for the user. The R-Tec chisel features a unique cutting head with extra wedges for increased breakout.
Benefits
For light chipping and chiseling of tile, mortar, glazing compounds and other masonry products
Shank 1/2 In.
For use with SDS-max® hammers
Length 14 In.
Specifications
Attributes
Description Scaling chisel, self-sharpening
Flute Length 0.0
Length 14.0″
Quantity 1
Shank Diameter 0.0
Size 2″ x 14″
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
1 Inch SDS-Max Drill Bit
MIN-$10
DAY-$15
24HR-$20
Bosch HC5051 1-Inch x 16-Inch SDS Max Rotary Hammer Bit
The product is 1x16x21 SDS Max Bit
Carbide tipped bit head is harder, tougher, and more resistant to extreme loads
1″ diameter, 16″ useable length, 21″ overall length
Four chiseling faces and cutting edges double the chiseling action for more efficient drilling
This Bosch 1-inch by 16-inch flute by 21-inch SDS-Max rotary hammer drill bit offers improved performance with its carbide-tipped head with 4 cutting edges. The bit is designed to help reduce vibration when drilling. The bit shaft wears at a slower rate and better withstands repeated use.
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
1×16 Inch SDS-Max Flat Chisel
MIN-$5
DAY-$10
24HR-$15
1 in. x 16 in. SDS Max Steel Flat Chisel
The Milwaukee 48-62-4081 SDS Max Steel Flat Chisel is ideal for chipping and channeling in concrete and other demolition work. It’s forged from high-grade steel and heat treated for strength.
Cold chisel fits tools with SDS Max chucks
Ideal for chipping and channeling in concrete and other demolition work
Forged high-grade steel construction for durability
Heat-treated work areas for strength
1 in. W x 16 in. L
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT