Coil Nailer
Features
Innovative firing valve – reduces air consumption without compromise on power or speed
Bi-metal driver blade reduces wear and improves durability
Power in, power out feed system – improves speed and delivers consistent drives
Tool Weight: 5.2 lbs (2.35 kgs)
Height: 10 7/8″ (276 mm)
Length: 10 5/8″ (269 mm)
Width: 4 1/2″ (114 mm)
Technology: Pneumatic
Trigger Type: Contact Actuation
Operating Pressure: 70 – 120 (PSI)
Operating Pressure: 4.8 – 8.3 (Bar)
Air Consumption: 3.86 (SCFM)
Air Inlet NPT: 1/4″
Capacity: 120
Power Type: Pneumatic
Range: 3/4″ – 1 3/4″
Minimum Rate for this item is the Day Rate
4HR-$20
DAY-$20
24HR-$30
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Related Products
48″ Tile Scraper
4-Inch Strip and Clean Scraper, 48-Inch Steel Handle
Uses # 93, #794, #795 blade
Tackle big scraping jobs from paint to floor tile
Die-cast aluminum scraping heads
Maximum blade rigidity
Product Description
This is strip ‘n’ clean scraper and blades. This product adds a great quality. Easy to use and handle.
4HR-$15
DAY-$15
24HR-$20
THE MINIMUM RATE FOR THIS ITEM IS DAY
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Compressor (Small)
Specifications
CFM @ 90 PSI
4.2 Horsepower/ Motor 2.0 HP, 120V, 15.0A
Compressor Single stage
Cylinder Cast iron
Tank Size 5-gallon
Weights & Dimensions
Net Weight 61 lbs.
Length 20.5 in.
Width 15.5 in.
Height 17.5 in.
4HR-$25
DAY-$25
24HR-$30
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Flooring Nailer
BOSTITCH MIIIFN
1-1/2-inch to 2-inch pneumatic flooring nailer for driving L-shaped flooring cleats
High-speed; extra-wide composite base; high-capacity magazine; 420 inch-pounds of driving power
Constructed of aircraft-grade aluminum
Includes rubber-tipped mallet
17-1/4 by 3-1/8 by 11-1/2; 11.2 pounds
Product Description
For solid and engineered hardwood flooring. High-speed mallet actuated pneumatic operation. Extra-wide composite base plate for added stability. Long reach handle for improved comfort and control. Specs: Height: 11.5″; Length: 17.25″; Width: 3.13″;
Weight: 11.2 lbs;
Driving Power: 420 Inch Lbs;
Operating Pressure: 70-90 PSI;
Thread Fitting Type: 3/8″ NPT;
Magazine Capacity: 110 Cleats.
Fastener Specifications: Drives 1-1/2 to 2″ Cleat Nails.
The Bostitch MIIIFN Pneumatic Flooring Cleat Nailer lets you create professional-looking floors quickly and
comfortably. Its high-speed pneumatic operation rapidly drives nails into both unfinished and pre-finished
hardwood flooring, and its long-grip handle allows you to maintain a comfortable posture when working.
Tackling prefinished flooring is no problem with the included adapter foot and the extra-wide base plates
that drive staples exactly where you want them.
The Bostitch Pneumatic Flooring Cleat Nailer At a Glance:
420 in./lbs. of driving power
High-speed, mallet-actuated operation
Extra-wide base plate for stability and control
Ergonomic design with elongated handle
1.5″ to 2.0″ L-shaped cleats are ideal for installing hardwood flooring.
Adaptor foot and FloorGuard graphite mallet provide stability and control.
Interchangeable base plates help you drive cleats at the proper angle and depth.
All the Power You Need to Get Jobs Done Quickly
Harness the power of compressed air and complete your flooring jobs quickly and easily. Just connect the
Bostitch MIIIFN Pneumatic Flooring Cleat Nailer to your air compressor for 420 in/lbs of impact at 70-120 PSI.
A manual strike will activate the firing action with a lightweight FloorGuard graphite mallet, and a 110-cleat
magazine will keep you working without interruption.
Comfortable Design Keeps You in Control
Ergonomically designed for ease of use, the MIIIFN features an elongated handle that lets you work in a
natural, comfortable position. For control, the extra-wide 1/2- and 3/4-inch interchangeable base plates sit
flush against floor boards for stability, so you can drive cleats at the proper angle and depth every time.
Additionally, a pre-finished floorboard adapter foot won’t scuff or scratch floors during installation for a
professional-grade look.
Lightweight, Durable Construction for Everyday Use
The MIIIFN Pneumatic Flooring Cleat Nailer’s lightweight body and graphite FloorGuard mallet make this tool
comfortable enough to wield all day without fatigue. Built for durability, this nailer will withstand the wear
and tear of any jobsite.
The Bostitch MIIFN Pneumatic Flooring Cleat Nailer measures 3.13 x 11.5 x 17.25 inches (WxHxL) and weighs
11.2 pounds.
Refer to your flooring recommendations for fastening tool
MINIMUM RATE FOR THIS ITEM IS DAY RATE
MIN-$45
DAY-$45
24HR-$50
FOR EXTENDED PEROID RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Duraheater
DESCRIPTION
Duraheat, 220,000 btu, kerosene portable forced air heater with dual heat technology, 180,000 btu on low, 220,000 btu on high, commercial grade, heats up to 5,300 sq ft, includes digital diagnostics & led temperature indicator, flat free cold weather tires, built in thermostat, 13 gallon fuel tank, 650 cfm, run time fuel gauge, on/off switch, 1 touch ignition, built in air pressure gauge, auxiliary power outlet, threaded axle system, 1 touch electronic start, extension cord wrap, dual lift handles & convenient drain plug, includes ul listed large capacity motors & fuse protected electrical system, all components are securely fastened into chassis to insure long life, utilizes heavy duty spark technology for in field endurance, multi-fuel capable, has been factory tested to operate with 1k kerosene
220,000 Btu’s
Dual Heat Settings (180 – low / 220 – high) allows set-back of btu output to minimize fuel consumption and
extend operating time
Integral auxiliary power outlet
Large capacity 13 gallon fuel tank
Built-in air pressure gauge
Extension cord wrap
Digital diagnostics and LED temperature indicator
10″ flat-free cold weather tires
Tank drain plug
650 CFM
Operates up to 10 hours on one tankful
SPECIFICATIONS
Product Weight (pounds): 68.3
Package dimensions (inches)
Length: 42.5
Width: 18.1
Height: 20.7
Assembled, or out-of-package, dimensions (inches)
Length: 41.81
Width: 23.11
Height: 26.14
MINIMUM RATE FOR THIS ITEM IS THE DAY RATE
MIN-$35
DAY-$35
24HR-$50
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
1-3/8 Inch SDS-Max Drill Bit
MIN-$10
DAY-$15
24HR-$20
Bosch HC5081 1-3/8 In. SDS-max
Product Description
Bosch carbide rotary hammer bits feature tips that stay sharper longer and deliver more holes within specification than competitive bits. Manufactured to ANSI specification B212.14. SDS-max rotary hammer bits fit Bosch SDS-max hammers and competitive SDS-max drive hammers and Hilti hammers using TE-Y and TE-FY shanks. Unrivaled power from solid carbide head with robust S-cutter design for added speed
and life.
Highest drilling speed with inclined side cutters provides fast concrete drilling
Compact head for fast dust removal and longer life
Active-centering tip provides quick, accurate starts
Wear mark indicator assures accuracy of hole diameter
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
2×14 Inch SDS-Max Scaling Chisel
MIN-$5
DAY-$10
24HR-$15
HS1917 2 In. x 14 In. Scaling Chisel SDS-max® Hammer Steel
PRODUCT DESCRIPTION
Description
Bosch R-Tec technology for SDS-max® chisels use an energy-diverting reflection element that increases material removal by 15%. Because the energy is dispersed back into the work material, the tool and bit do more of the work with less vibration for the user. The R-Tec chisel features a unique cutting head with extra wedges for increased breakout.
Benefits
For light chipping and chiseling of tile, mortar, glazing compounds and other masonry products
Shank 1/2 In.
For use with SDS-max® hammers
Length 14 In.
Specifications
Attributes
Description Scaling chisel, self-sharpening
Flute Length 0.0
Length 14.0″
Quantity 1
Shank Diameter 0.0
Size 2″ x 14″
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Westpointe Dehumidifier
DESCRIPTION
Westpointe, 30 PT, Dehumidifier, Modern White Design, 115V, 3A, 3 Prong Plug,
Approximate Coverage: 500 SQFT, Electronic Control Panel, Low Operating Temperature, With Convenient Bucket Full Indicator Light, New Energy Star Rated, 24 Hour Timer, 250 Hour Filter Wash Remind, Adjustable Thermostat, 2 Speed Fan Control, Auto Shut Off, Continuous Drain Mode With External Drain, 4 Easy Roll Casters, Uses Eco Friendly R410A Refrigerant, 31 LB, Dimensions: 14.17″W x 20.08″H x 10.28″D.
SPECIFICATIONS
Product Weight (pounds): 32.0
Package dimensions (inches)
Length: 15.2
Width: 10.2
Height: 19.7
MINIMUM RATE FOR THIS ITEM IS THE DAY RATE
MIN-$15
DAY-$15
24HR-$20
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
1×12 Inch SDS-Max Flat Chisel
MIN-$5
DAY-$10
24HR-$15
Bosch HS1911 SDS-max® Hammer Steel 12-in Flat Chisel
For concrete removal and hard surface break-up
Fits Bosch SDS-max hammers
1 In. chisel width and 12 In. long SDS-max shank
One-piece design
Product Description
Bosch offers a full assortment of SDS-max hammer steel points and chisels. This SDS-max flat chisel is highly durable and designed for extreme performance. This product uses an SDS-max shank to ensure tight grip for the toughest jobs.
Item Weight 14.4 ounces
Product Dimensions 12.5 x 1 x 1 inches
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT