10×10 Hand Tamper
This True Temper 10″ x 10″ tamper is made for heavy duty construction and industrial work! The 10.6 lb steel tamper head is perfect for tamping asphalt, gravel, stone, and dirt. The flexible ash handle is water resistant for outdoor applications.
MINIMUM RATE FOR THIS ITEM IS 24HR
MIN-$10
DAY-$10
24HR-$10
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Related Products
Coil Nailer
Features
Innovative firing valve – reduces air consumption without compromise on power or speed
Bi-metal driver blade reduces wear and improves durability
Power in, power out feed system – improves speed and delivers consistent drives
Tool Weight: 5.2 lbs (2.35 kgs)
Height: 10 7/8″ (276 mm)
Length: 10 5/8″ (269 mm)
Width: 4 1/2″ (114 mm)
Technology: Pneumatic
Trigger Type: Contact Actuation
Operating Pressure: 70 – 120 (PSI)
Operating Pressure: 4.8 – 8.3 (Bar)
Air Consumption: 3.86 (SCFM)
Air Inlet NPT: 1/4″
Capacity: 120
Power Type: Pneumatic
Range: 3/4″ – 1 3/4″
Minimum Rate for this item is the Day Rate
4HR-$20
DAY-$20
24HR-$30
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
5′ Brush Cutter
Description
The RCR12 Series is an economically-priced Rotary Cutter, capable of cutting 1″ diameter material and
is ideal for daily use in small lots and hobby farm grass maintenance. These cutters offer fast, clean,
dependable mowing and have been extensively tested to ensure operating safety. High blade tip
speeds assure a clean cut in a variety of field conditions. The standard stump jumper slides over stumps,
rocks and debris and safety guards protect you and your property
Surpassed rugged industry standards
All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures
specified by ANSI.
Tractor HP range 18 – 60 HP
Cat. 3 driveline with shearbolt, Shear bolt offers maximum driveline protection.
Cat. 3 driveline with 2-plate slip-clutch Slip-clutch driveline offers convenience for continual work.
Floating top link Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole
position to allow greater lift leverage for smaller tractors.
Round back design Helps discharge grass better than enclosed or partially enclosed cutters.
1 1/4″ – 10″ Cutting Height Cutting height for wide range of cutting conditions.
1/2″ x 3″ Heat-treated free swinging blades Free swinging protects from obstructions. Heat-treated
offers longer life.
Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output
shaft.
10 Gauge stump jumper Allows cutter to slide over obstructions protecting the gearbox output shaft.
High blade tip speed Ensures clean cut.
Laminated tailwheel Laminated material is long lasting in rough conditions and can’t go flat.
Heavy-duty spindle on tailwheel 1 1/4″ spindle gives the strength to protect tailwheel assembly
4HR-$99
DAY-$99
24HR-$120
THE MINIMUM RATE FOR THIS ITEM IS DAY
THE RATE OF THIS ITEM WILL BE ADDED TO TRACTOR RENTAL
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
18 gal. Shop-Vac
Shop-Vac® 18 Gallon* 6.5 Peak HP** Hardware Wet Dry Vac
Shop-Vac®Hardware Series Wet Dry Vacs
The Shop-Vac® 18 Gallon* 6.5 Peak HP** Wet Dry Utility Vac features the SVX2® Motor Technology†.
This new motor has more power and longer motor life when compared to the Shop-Vac® standard
6.5 Peak HP** motor. Use this vacuum to clean up your workspace, basement or garage. The hose
attaches to the rear blower port allowing you to blow the dirt out of hard to reach places.
Features
Cord Length: 18 Feet
Hose Size: 2.5″ Diameter
Warranty: 4 Years
Tank Drain
Lock-On® Hose
Blower Feature
Onboard Accessory Storage
Includes
Accessories
8-foot by 2.5-inch diameter Lock-On® hose
two 2.5-inch diameter extension wands
14-inch wet/dry floor nozzle
4HR-$15
DAY-$20
24HR-$25
ITEM IS SENT OUT FOR WET RENTAL.
IF DOING DRY, CUSTOMER MUST PURCHASE FILTER FOR ITEM
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Push Spreader 120lb
The Spyker Pro-Series S60-12020 Commercial Broadcast Spreader is the right walk-behind spreader for the
job. Its large 120 lb. poly hopper lets you cover more ground between fill-ups so you can get more done in
less time. Affectionately called the “Mulch-N-More” because of its extra-large single port opening, the
S60-12020 will work with larger materials such as pin mulch and rock salt.
The design of the S60-12020 enables it to project better spread coverage while maintaining perfect
equilibrium using the on-the-fly Accu-Way™ adjustment cable. The Accu-Way™ adjusts the material flow
forward or backward, which determines how quickly the granules launch off of the spinner/fan. This allows
the operator to maintain a perfectly balanced spread pattern regardless of the chosen material.
Features of Spyker Spreader S60-12020 (Mulch & More)
120 lb. (55kg) Poly Hopper Capacity
One-Piece Welded Stainless Steel Frame
5/8” Solid Stainless Steel Axle
13” x 5” Pneumatic Tires
Positive On/Off System – No Cables
Patented Split-shaft Design for Easy Calibration
Oversized Single-gate Opening
4HR-$15
DAY-$15
24HR-$20
THE MINIMUM RATE FOR THIS ITEM IS DAY
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
1.25 Inch SDS-Max Drill Bit
MIN-$10
DAY-$15
24HR-$20
1-1/4 in. x 18 in. SDS-max Carbide Rotary Hammer Drill Bit for Concrete Drilling
Carbide bits feature tips that stay sharper longer
Active-centering tip provides quick, accurate starts
Inclined side cutters provides fast concrete drilling
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
2 Inch SDS-Max Drill Bit
MIN-$10
DAY-$15
24HR-$20
Patented extra strength tip for longer life
Large flute volume for fast drilling dust transport and less clogging
Narrow flute back for reduced friction between bit and material
Creates true round holes for anchors
Diameter is 2 inches with 16 inches usable length. Total length is 21 inches.
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
48″ Tile Scraper
4-Inch Strip and Clean Scraper, 48-Inch Steel Handle
Uses # 93, #794, #795 blade
Tackle big scraping jobs from paint to floor tile
Die-cast aluminum scraping heads
Maximum blade rigidity
Product Description
This is strip ‘n’ clean scraper and blades. This product adds a great quality. Easy to use and handle.
4HR-$15
DAY-$15
24HR-$20
THE MINIMUM RATE FOR THIS ITEM IS DAY
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Framing Nailer
34° FramePro®701XP
3 1/2″ Paper Taped Framing Nailer
Applications
Framing, Sheathing, Sub-flooring, Crate, Pallet & Truss Assembly
Features
Straight-line 34° magazine for better line of sight.
Simple two-step loading.
Aggressive toenail safety.
Fits easily between studs and joists.
Specifications
Tool Weight: 8 lbs (3.62 kgs)
Height: 13 1/4″ (337 mm)
Length: 15 1/8″ (384 mm)
Width: 4 3/16″ (106 mm)
Technology: Pneumatic
Trigger Type: Sequential Actuation
Operating Pressure: 70 – 120 (PSI)
Operating Pressure: 4.8 – 8.3 (Bar)
Air Consumption: 10 (SCFM)
Air Inlet NPT: 3/8″
Capacity: 70
Power Type: Pneumatic
Range: 2″ – 3 1/2″
Minimum Rate for this item is the Day Rate
4HR-$35
DAY-$35
24HR-$45
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT