Carpet Fan
Dry carpet, hard floors and other surfaces with Tennant’s durable and travel friendly Blower, with three fan
speeds and 2,500 cfm / 713 airflow.
Blower Features and Benefits
Dry areas quickly with this compact, three-speed Blower:
Dry carpet, hard floors, fresh paint, concrete sealer, and more, quickly and efficiently
Ensure durability and years of use with this industrial blower’s rotational-mold body
Direct air flow where you need it to dry almost any surface
Key machine features of the Blower:
2,500 cfm / 71 m3/min of airflow dries surfaces quickly with the fan’s three different speeds
Stackable blower frees up valuable space in closets and transport vehicles for convenient storage
MIN-$25
DAY-$30
24HR-$35
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Related Products
Westpointe Dehumidifier
DESCRIPTION
Westpointe, 30 PT, Dehumidifier, Modern White Design, 115V, 3A, 3 Prong Plug,
Approximate Coverage: 500 SQFT, Electronic Control Panel, Low Operating Temperature, With Convenient Bucket Full Indicator Light, New Energy Star Rated, 24 Hour Timer, 250 Hour Filter Wash Remind, Adjustable Thermostat, 2 Speed Fan Control, Auto Shut Off, Continuous Drain Mode With External Drain, 4 Easy Roll Casters, Uses Eco Friendly R410A Refrigerant, 31 LB, Dimensions: 14.17″W x 20.08″H x 10.28″D.
SPECIFICATIONS
Product Weight (pounds): 32.0
Package dimensions (inches)
Length: 15.2
Width: 10.2
Height: 19.7
MINIMUM RATE FOR THIS ITEM IS THE DAY RATE
MIN-$15
DAY-$15
24HR-$20
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
10×10 Hand Tamper
This True Temper 10″ x 10″ tamper is made for heavy duty construction and industrial work! The 10.6 lb steel tamper head is perfect for tamping asphalt, gravel, stone, and dirt. The flexible ash handle is water resistant for outdoor applications.
MINIMUM RATE FOR THIS ITEM IS 24HR
MIN-$10
DAY-$10
24HR-$10
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Coil Nailer
Features
Innovative firing valve – reduces air consumption without compromise on power or speed
Bi-metal driver blade reduces wear and improves durability
Power in, power out feed system – improves speed and delivers consistent drives
Tool Weight: 5.2 lbs (2.35 kgs)
Height: 10 7/8″ (276 mm)
Length: 10 5/8″ (269 mm)
Width: 4 1/2″ (114 mm)
Technology: Pneumatic
Trigger Type: Contact Actuation
Operating Pressure: 70 – 120 (PSI)
Operating Pressure: 4.8 – 8.3 (Bar)
Air Consumption: 3.86 (SCFM)
Air Inlet NPT: 1/4″
Capacity: 120
Power Type: Pneumatic
Range: 3/4″ – 1 3/4″
Minimum Rate for this item is the Day Rate
4HR-$20
DAY-$20
24HR-$30
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
1×16 Inch SDS-Max Flat Chisel
MIN-$5
DAY-$10
24HR-$15
1 in. x 16 in. SDS Max Steel Flat Chisel
The Milwaukee 48-62-4081 SDS Max Steel Flat Chisel is ideal for chipping and channeling in concrete and other demolition work. It’s forged from high-grade steel and heat treated for strength.
Cold chisel fits tools with SDS Max chucks
Ideal for chipping and channeling in concrete and other demolition work
Forged high-grade steel construction for durability
Heat-treated work areas for strength
1 in. W x 16 in. L
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
1.75 Inch SDS-Max Drill Bit
MIN-$10
DAY-$15
24HR-$20
1 3/4 IN SDS MAX
Product description
Bosch carbide rotary hammer bits feature tips that stay sharper longer and deliver more holes within specification than competitive bits. Manufactured to ANSI specification B212.14. SDS-max rotary hammer bits fit Bosch SDS-max hammers and competitive SDS-max drive hammers and Hilti hammers using TE-Y and TE-FY shanks. Unrivaled power from solid carbide head with robust S-cutter design for added speed
and life.
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
18 gal. Shop-Vac
Shop-Vac® 18 Gallon* 6.5 Peak HP** Hardware Wet Dry Vac
Shop-Vac®Hardware Series Wet Dry Vacs
The Shop-Vac® 18 Gallon* 6.5 Peak HP** Wet Dry Utility Vac features the SVX2® Motor Technology†.
This new motor has more power and longer motor life when compared to the Shop-Vac® standard
6.5 Peak HP** motor. Use this vacuum to clean up your workspace, basement or garage. The hose
attaches to the rear blower port allowing you to blow the dirt out of hard to reach places.
Features
Cord Length: 18 Feet
Hose Size: 2.5″ Diameter
Warranty: 4 Years
Tank Drain
Lock-On® Hose
Blower Feature
Onboard Accessory Storage
Includes
Accessories
8-foot by 2.5-inch diameter Lock-On® hose
two 2.5-inch diameter extension wands
14-inch wet/dry floor nozzle
4HR-$15
DAY-$20
24HR-$25
ITEM IS SENT OUT FOR WET RENTAL.
IF DOING DRY, CUSTOMER MUST PURCHASE FILTER FOR ITEM
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
5′ Brush Cutter
Description
The RCR12 Series is an economically-priced Rotary Cutter, capable of cutting 1″ diameter material and
is ideal for daily use in small lots and hobby farm grass maintenance. These cutters offer fast, clean,
dependable mowing and have been extensively tested to ensure operating safety. High blade tip
speeds assure a clean cut in a variety of field conditions. The standard stump jumper slides over stumps,
rocks and debris and safety guards protect you and your property
Surpassed rugged industry standards
All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures
specified by ANSI.
Tractor HP range 18 – 60 HP
Cat. 3 driveline with shearbolt, Shear bolt offers maximum driveline protection.
Cat. 3 driveline with 2-plate slip-clutch Slip-clutch driveline offers convenience for continual work.
Floating top link Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole
position to allow greater lift leverage for smaller tractors.
Round back design Helps discharge grass better than enclosed or partially enclosed cutters.
1 1/4″ – 10″ Cutting Height Cutting height for wide range of cutting conditions.
1/2″ x 3″ Heat-treated free swinging blades Free swinging protects from obstructions. Heat-treated
offers longer life.
Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output
shaft.
10 Gauge stump jumper Allows cutter to slide over obstructions protecting the gearbox output shaft.
High blade tip speed Ensures clean cut.
Laminated tailwheel Laminated material is long lasting in rough conditions and can’t go flat.
Heavy-duty spindle on tailwheel 1 1/4″ spindle gives the strength to protect tailwheel assembly
4HR-$99
DAY-$99
24HR-$120
THE MINIMUM RATE FOR THIS ITEM IS DAY
THE RATE OF THIS ITEM WILL BE ADDED TO TRACTOR RENTAL
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
2 Inch SDS-Max Drill Bit
MIN-$10
DAY-$15
24HR-$20
Patented extra strength tip for longer life
Large flute volume for fast drilling dust transport and less clogging
Narrow flute back for reduced friction between bit and material
Creates true round holes for anchors
Diameter is 2 inches with 16 inches usable length. Total length is 21 inches.
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT