Backhoe Attachment
The BH77 Backhoe is performance-matched with the B50 tractors to deliver more power and greater
digging capacity. Additionally, the BH77 backhoe features a curved boom, protected hoses.
Backhoe Specifications
Transport height in. (mm) 80.7 (2051)
Stabilizer spread – transport in. (mm) 51.8 (1315)
Ground clearance in. (mm) 12.6 (319)
Digging depth 2ft flat bottom in. (mm) 91.8 (2331)
Operating height fully raised in. (mm) 119.2 (3029)
BH77
Loading height (length of dipper cyl. = 715mm) in. (mm) 66.7 (1693)
Loading reach (length of dipper cyl. = 715mm) in. (mm) 50.8 (1290)
Reach from swing pivot in. (mm) 124.6 (3165)
Swing pivot to rear axle center line in. (mm) 38.4 (976)
Angle of departure per SAE J1234 deg. 17.3
Swing arc deg. 180
4HR-$75
DAY-$75
24HR-$100
THE MINIMUM RATE FOR THIS ITEM IS DAY
THE RATE OF THIS ITEM WILL BE ADDED TO TRACTOR RENTAL
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Related Products
BlueBird Tow Behind Aerator
4HR-$45
DAY-$55
24HR-$65
TA12 Towable Aerator
The TA12 has an aerating width of 48IN to give you the extra capability to handle just about any situation.
Two independent tine rotors with 40 interchangeable closed spoon 1/2IN tines provide superior maneuverability around corners and tight areas. Six optional weight containers ensure optimal soil penetration
Tip wheels allow the TA10 to easily pass through narrow openings.
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Lawn Solutions Slit Seeder
MIN-$80
DAY-$99
24HR-$120
Durable, lightweight and easy to use, Operators can make a tight turn — even on hills. The variable-speed
drive system operates in forward and reverse. All models are constructed of solid 11-gauge steel for
maximum durability. Blades are made of high-carbon, heat-treated spring steel that can handle abuse
without chipping or bending. A large 40 lb. capacity seed mixer regulates seed delivery based on ground
speed for even application.
Specifications
Blade Type 10 Verticutting Blades
Engine Subaru® EX27
Fuel Capacity 1.6 gallons
Ground Speed 3 mph (4.8 km/h) (forward); 2.2 mph (3.5 km/h) (reverse) Height 28″ (handle folded) 45″ (handle up)
Hopper Capacity 40 lbs. (18 kg)
Length 27″ (69 cm) (handle folded) 52″ (132 cm) (handle up)
Seeding Depth Up to 1″ (2.5 cm)
Weight 260 lbs (118 kg)
Width 30″ (76 cm)
Working Width 20″ (51 cm)
Disclaimer
All walk-behind machines comply with ANSI safety standards: B71.4 for commercial turf care equipment or
B71.8 for OPE walk-behind ground-engaging equipment.
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
7HP Walk Behind Blower
4HR-$35
DAY-$40
24HR-$45
Moves Air At 185 MPH & 1850 CFM
Clears away leaves & yard waste in no time
Much faster & easier on your back than raking
15 Inch Diameter Poly Impeller
Powerful & light weight; balanced for smooth operation
Adjustable Deflector With Kickable Handle
Divert air up, down, forward or sideways without bending over
Sturdy 3-Wheel Frame
Easy to manuever on any terrain
Adjustable loop handle with cushioned anti-vibration grip
9-Inch Pneumatic Front-Locking Swivel Wheel
2 height adjustments put the air right where it’s needed
12-inch pneumatic rear wheels provide stability & traction
Axle gussets for extra stability
Specifications
Engine
Engine Brand Briggs & Stratton
Starting System Recoil Start
Engine Cycle 4-Cycle
CC 250 CCs
Impeller
Impeller Material Composite
Impeller Size 15 Inches
Blower
Volume of Air 1850 CFM
Air Speed 185 mph
Wheels
Front Tire Size 9 Inch
Rear Tire Size 12 Inch
Tire Type Pneumatic Wheels
Overview
Weight 135 Pounds
FOR ADDITIONAL RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Billy Goat Aerator
4HR-$60
DAY-$80
24HR-$99
This unit completely eliminates the conventional and cumbersome center wheel and center drum designs found on other units, which are prone to wear, vibration and damage. Billy Goat’s outboard drive wheels also eliminate center wheel slip and abuse from ramp loading with the tines engaged.
Additionally, the AE401 also eliminates bulky steel weights, in favor of a simple to use water weight positioned directly over the tines for better aeration depth (full tank = 50 lbs.). The unit features the industry’s softest tine engagement and exclusive Lift N Lock disengagement for best in class comfort and productivity. After use and during transport, tilt up serviceability, removable tine stars, and Fold-n-Go handles, and easy adjust drive chains make service and transport convenient and simple.
Engine Honda
Displacement (cc) 118
Coring Tines (in) .625 x 3.5
Tines 24
Tine Pattern (in) 4.5 x 7
Weight (lbs) 242
Length (in) 57
Width (in) 29
Height (in) 52.5
Wheel Type Semi-pneumatic
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
24 Inch Brush Cutter
MIN-$60
DAY-$75
24HR-$95
Billy Goat Outback 24″Brush Cutter
Nearly Indestructible
Say good-bye to sickle mowers, hand held cutters, chainsaws, etc. Designed for abuse, the Billy Goat Outback Brush Cutter cuts a clear path through the densest brush, grass and weeds over 8 feet tall, saplings up to 1.5 inches in diameter, and other problem vegetation at the rate of 2/3 acre per hour. If the front brush card can push it over, the Outback Brush Cutter will cut it
.
Tough Enough,The Billy Goat Outback Brush Cutter is designed and thoroughly tested to withstand an unexpected encounter with almost anything without breaking the blade or throwing a belt. The Billy Goat Outback Brush Cutter has innovative skids allow for easier maneuverability from side to side and enhance tire traction over rough terrain.
Tight Quarters
The Billy Goat Outback Brush Cutter has three forward speeds plus a reverse gear make cutting your way through tough terrain and vegetation much easier
The Outback® Brush Cutter cuts it – Perfect for clearing unwanted grass, weeds, brush and saplings
Rear discharge deck – Cut debris rolls out slowly and safely after it is cut
SPECIFICATIONS
BC2402H
Engine Type Honda GXV
Model Number GXV390UTIDABG
Horsepower 13.0
Fuel Capacity 2.3 qt
Oil Capacity 1.2 qt
Engine Weight 70.5 lb
Unit Weight 278 lb
Overall Length 82.5 in (2.09 m)
Overall Width 32.0 in (0.81 m)
Overall Height 43 in (1.09 m)
Maximum Operating Slope 20o
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT
Stihl FS 560 C-EM Clearing Saw
24HR-$125 (THIS IS MIN RATE)
The most powerful STIHL clearing saw in its class – the FS 560 C-EM cuts through wild growth, hedges and thickets with a rugged design ideal for heavy landscape and forest cutting. Powered by a low-emission engine that is 12% more fuel-efficient than the previous model, the STIHL FS 560 C-EM clearing saw features the STIHL M-Tronic™ engine management system, which provides optimum engine power at all times and automatically adjusts to changes in elevation, temperature and air filter cleanliness. A large 33.5 oz. translucent fuel tank – 31% larger than the previous model – offers longer run times and less refueling. This clearing saw also comes standard with the Easy2Start™ system, which requires minimal pulling force to start the engine. The 4-point anti-vibration system allows optimal control while reducing fatigue, and an easy-to-adjust, soft-grip bike handle swivels for easy transport and storage.
FS 560 C-EM Specifications –
DISPLACEMENT 57.1 cc (3.48 cu. in.)
ENGINE POWER 2.8 kW (3.75 bhp)
WEIGHT* 10.2 kg (22.5 lbs.)
FUEL CAPACITY 990 cc (33.5 oz.)
POWER SOURCE Gas
*Weight without cutting attachment or deflector.
1 Gallon mixed fuel is included with this rental
Saftey kit is included with rental of this unit
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
5′ Brush Cutter
Description
The RCR12 Series is an economically-priced Rotary Cutter, capable of cutting 1″ diameter material and
is ideal for daily use in small lots and hobby farm grass maintenance. These cutters offer fast, clean,
dependable mowing and have been extensively tested to ensure operating safety. High blade tip
speeds assure a clean cut in a variety of field conditions. The standard stump jumper slides over stumps,
rocks and debris and safety guards protect you and your property
Surpassed rugged industry standards
All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures
specified by ANSI.
Tractor HP range 18 – 60 HP
Cat. 3 driveline with shearbolt, Shear bolt offers maximum driveline protection.
Cat. 3 driveline with 2-plate slip-clutch Slip-clutch driveline offers convenience for continual work.
Floating top link Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole
position to allow greater lift leverage for smaller tractors.
Round back design Helps discharge grass better than enclosed or partially enclosed cutters.
1 1/4″ – 10″ Cutting Height Cutting height for wide range of cutting conditions.
1/2″ x 3″ Heat-treated free swinging blades Free swinging protects from obstructions. Heat-treated
offers longer life.
Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output
shaft.
10 Gauge stump jumper Allows cutter to slide over obstructions protecting the gearbox output shaft.
High blade tip speed Ensures clean cut.
Laminated tailwheel Laminated material is long lasting in rough conditions and can’t go flat.
Heavy-duty spindle on tailwheel 1 1/4″ spindle gives the strength to protect tailwheel assembly
4HR-$99
DAY-$99
24HR-$120
THE MINIMUM RATE FOR THIS ITEM IS DAY
THE RATE OF THIS ITEM WILL BE ADDED TO TRACTOR RENTAL
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Sidewalk Edger
4HR-$35
DAY-$40
24HR-$50
The Pro Edger is user–friendly with fingertip controls and a ratchet–arm height adjustment system for fatigue–free operation and control. The Little Wonder Pro Edger is built for heavy, daily usage. Cut create crisp, distinct edges faster, and with less effort.
Available with Honda® GX120 engine
Edges up to 90 feet per minute. Get the job done quickly and more efficiently!
Largest available cast iron cutter head on the market
Dual belt drive provides extra power to the blade and reduces slippage during application.
10″ steel blade is sharpened on all four sides giving you the ability to flip the blade over and extends time between sharpening
Adjust cutting depth up to 4″
Blade shield keeps debris off the belts
Convenient controls adjust depth, belt tension, and blade engagement all from the operator’s position
Anti-vibration grip for user comfort
Four wheel design provides extra stability and eliminates the need for a curb wheel.
All wheels have steel hubs with ball bearings and full axles front and rear for smoother and easier
maneuverability
Engine Honda GX120
Handles Anti-Vibration Grips
Displacement 118cc
Cast Iron Cutter Head Fixed
Drive Belt Dual Belts Dual Belts
Edging Depth Up to 4 inches
Steel Hubbed 8″ Wheels 4
Weight (pounds) 69
Fuel Capacity 3 quart
FOR EXTENDED RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT