55lb Spreader
Product description
Walk behind spreader with Poly hopper (55lb. Capacity)
Product information
Package Dimensions 20.9 x 17.4 x 13 inches
Item Weight 19.4 pounds
Shipping Weight 19.4 pounds
Manufacturer Spyker
4HR-$10
DAY-$10
24HR-$15
THE MINIMUM RATE FOR THIS ITEM IS DAY
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Related Products
Duraheater
DESCRIPTION
Duraheat, 220,000 btu, kerosene portable forced air heater with dual heat technology, 180,000 btu on low, 220,000 btu on high, commercial grade, heats up to 5,300 sq ft, includes digital diagnostics & led temperature indicator, flat free cold weather tires, built in thermostat, 13 gallon fuel tank, 650 cfm, run time fuel gauge, on/off switch, 1 touch ignition, built in air pressure gauge, auxiliary power outlet, threaded axle system, 1 touch electronic start, extension cord wrap, dual lift handles & convenient drain plug, includes ul listed large capacity motors & fuse protected electrical system, all components are securely fastened into chassis to insure long life, utilizes heavy duty spark technology for in field endurance, multi-fuel capable, has been factory tested to operate with 1k kerosene
220,000 Btu’s
Dual Heat Settings (180 – low / 220 – high) allows set-back of btu output to minimize fuel consumption and
extend operating time
Integral auxiliary power outlet
Large capacity 13 gallon fuel tank
Built-in air pressure gauge
Extension cord wrap
Digital diagnostics and LED temperature indicator
10″ flat-free cold weather tires
Tank drain plug
650 CFM
Operates up to 10 hours on one tankful
SPECIFICATIONS
Product Weight (pounds): 68.3
Package dimensions (inches)
Length: 42.5
Width: 18.1
Height: 20.7
Assembled, or out-of-package, dimensions (inches)
Length: 41.81
Width: 23.11
Height: 26.14
MINIMUM RATE FOR THIS ITEM IS THE DAY RATE
MIN-$35
DAY-$35
24HR-$50
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
10×10 Hand Tamper
This True Temper 10″ x 10″ tamper is made for heavy duty construction and industrial work! The 10.6 lb steel tamper head is perfect for tamping asphalt, gravel, stone, and dirt. The flexible ash handle is water resistant for outdoor applications.
MINIMUM RATE FOR THIS ITEM IS 24HR
MIN-$10
DAY-$10
24HR-$10
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
18 gal. Shop-Vac
Shop-Vac® 18 Gallon* 6.5 Peak HP** Hardware Wet Dry Vac
Shop-Vac®Hardware Series Wet Dry Vacs
The Shop-Vac® 18 Gallon* 6.5 Peak HP** Wet Dry Utility Vac features the SVX2® Motor Technology†.
This new motor has more power and longer motor life when compared to the Shop-Vac® standard
6.5 Peak HP** motor. Use this vacuum to clean up your workspace, basement or garage. The hose
attaches to the rear blower port allowing you to blow the dirt out of hard to reach places.
Features
Cord Length: 18 Feet
Hose Size: 2.5″ Diameter
Warranty: 4 Years
Tank Drain
Lock-On® Hose
Blower Feature
Onboard Accessory Storage
Includes
Accessories
8-foot by 2.5-inch diameter Lock-On® hose
two 2.5-inch diameter extension wands
14-inch wet/dry floor nozzle
4HR-$15
DAY-$20
24HR-$25
ITEM IS SENT OUT FOR WET RENTAL.
IF DOING DRY, CUSTOMER MUST PURCHASE FILTER FOR ITEM
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
1.5 Inch SDS-Max Drill Bit
MIN-$10
DAY-$15
24HR-$20
1-1/2 in. x 16 in. x 21 in. SDS-max Carbide Rotary Hammer Drill Bit for Concrete Drilling
1-1/2 in. x 18 in. x 21 in. Carbide Spiral SDS-MAX Rotary Hammer Drill Bit features a carbide tip to provide durability. The reduced-vibration design enables easy drilling and the 4 cutting edges offer versatility.
Suitable for use with Bosch SDS-MAX rotary hammer drills
Wild-bore multi-cutter X-head spiral drill bits offer minimal vibration
Carbide tip for durability
Includes 4 cutting edges
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
5/8 Inch SDS-Max Drill Bit
MIN-$10
DAY-$15
24HR-$20
Bosch HC5020 5/8-Inch SDS Max Rotary Hammer Bit
Highest drilling speed with inclined side cutters provides fast concrete drilling
Compact head for fast dust removal and longer life
Active-centering tip provides quick, accurate starts
Wear mark indicator assures accuracy of hole diameter
Carbide tipped bit head is harder, tougher, and more resistant to extreme loads
Four chiseling faces and cutting edges double the chiseling action for more efficient drilling
Diameter is 5/8-inch
Product Description
Bosch carbide rotary hammer bits feature tips that stay sharper longer and deliver more holes within
specification than competitive bits. Manufactured to ANSI specification B212.14. SDS-max rotary hammer
bits fit Bosch SDS-max hammers and competitive SDS-max drive hammers
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
3-1/4 Inch x 22 Inch SDS-Max Core Bit
MIN-$25
DAY-$30
24HR-$35
HC8536
3-1/4 In. x 22 In. SDS-max® Rotary Hammer Core Bit
Description
Bosch SDS-max® carbide-tipped rotary hammer core bits offer an integral shank for better power transmission. Bosch SDS-max® rotary hammer core bits with wave design go beyond the range of standard bits and allow smaller hammers to drill larger holes. Wave design transfers energy to bit more effectively for up to 40 percent faster drilling versus previous design.
Benefits
Wave design transfers energy to bit more effectively for up to 40 percent faster drilling versus previous design
Carbide-tipped centering bit
Asymmetrical carbide teeth for faster cutting, longer life
All-in-one core transmits power directly to the end of the bit
Maximum core size is 2-5/8 In. deep
Specifications
Attributes
Description N/A
Diameter 3-1/4″
Length 22.0″
Overall Length 22.0
Shank Diameter 0.0
Useable Length 17″
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
1 Inch SDS-Max Drill Bit
MIN-$10
DAY-$15
24HR-$20
Bosch HC5051 1-Inch x 16-Inch SDS Max Rotary Hammer Bit
The product is 1x16x21 SDS Max Bit
Carbide tipped bit head is harder, tougher, and more resistant to extreme loads
1″ diameter, 16″ useable length, 21″ overall length
Four chiseling faces and cutting edges double the chiseling action for more efficient drilling
This Bosch 1-inch by 16-inch flute by 21-inch SDS-Max rotary hammer drill bit offers improved performance with its carbide-tipped head with 4 cutting edges. The bit is designed to help reduce vibration when drilling. The bit shaft wears at a slower rate and better withstands repeated use.
First SDS bit is included with rental of our Max Hammer drills (CORE BITS NOT INCLUDED)
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Dri-Eaz
Product Features
LGR technology boosts effective operating range
Compact size – only 92 pounds
Draws only 5 amps – but removes 70 pints at AHAM
Quick pump access for easy servicing
New, rigid fold-down handle
Improved quick-release hose wrap design
Built-in ring for easy attachment of ducting
If power is interrupted during operation, the unit will automatically restart when power is restored.
(115V models only.)
Product Specifications
Model F292
Type Low Grain Refrigerant
Dimensions (H × W × D) 33.5 × 20.7 × 20.7 in.
Weight 92 lbs. | 42 kg
Water Removal Max (90°F/90% RH) 143 pints | 67.7 liters /day
Water Removal AHAM (80°F/60% RH) 70 pints | 33 liters /day
Operating Range 33° – 100°F
1° – 38°C
Compressor Type 5,595 Rotary
Defrost Type Hot-gas bypass
Process Air 160 CFM
Controls Touchpad
Hour Meter Yes
Condensate Pump Centrifugal
Drain Hose Length 40 foot
Air Filter High Air Flow
Wheels Semi-pneumatic
Handle Steel, fold-down
Housing Rotomolded polyethylene
Power 115 V 5 amps
Cord Length 25 foot
MINIMUM RATE FOR THIS ITEM IS THE DAY RATE
MIN-$70
DAY-$70
24HR-$80
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT