18 gal. Shop-Vac
Shop-Vac® 18 Gallon* 6.5 Peak HP** Hardware Wet Dry Vac
Shop-Vac®Hardware Series Wet Dry Vacs
The Shop-Vac® 18 Gallon* 6.5 Peak HP** Wet Dry Utility Vac features the SVX2® Motor Technology†.
This new motor has more power and longer motor life when compared to the Shop-Vac® standard
6.5 Peak HP** motor. Use this vacuum to clean up your workspace, basement or garage. The hose
attaches to the rear blower port allowing you to blow the dirt out of hard to reach places.
Features
Cord Length: 18 Feet
Hose Size: 2.5″ Diameter
Warranty: 4 Years
Tank Drain
Lock-On® Hose
Blower Feature
Onboard Accessory Storage
Includes
Accessories
8-foot by 2.5-inch diameter Lock-On® hose
two 2.5-inch diameter extension wands
14-inch wet/dry floor nozzle
4HR-$15
DAY-$20
24HR-$25
ITEM IS SENT OUT FOR WET RENTAL.
IF DOING DRY, CUSTOMER MUST PURCHASE FILTER FOR ITEM
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT
Related Products

Spreader, Push, 55lb Capacity
DAY-$10
24HR-$15
Walk behind spreader with 55lb. Capacity Poly hopper
Item Weight 19.4 pounds
Shipping Weight 19.4 pounds
Manufacturer Spyker
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Wet Tile Saw, 24″
4HR-$50
DAY-$60
24HR-$75
Rip Cut capacity: 24″
Diagonal Cut capacity: 18″
Depth of Cut: 3″
Blade Size: 10″
Weight 130 lbs.
Folding stand included w/ rental.
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Dehumidifier, Commercial LGR
DAY-$70
24HR-$80
Rated to remove 70 pints per day in average operating conditions.
Unit features an automatic drain pump, simply route drain hose to suitable location and the machine will drain every 6 minutes! Turn unit on and leave it alone till the job is done!
Low Grain Refrigerant technology boosts effective operating range.
Weight: 92 lbs.
Water Removal Max: @ 90°F/90% RH* – 143 pints/day
Water Removal AHAM:** @ 80°F/60% RH* – 70 pints/day
Operating Range: 33° – 100°F
*Relative Humidity
**Association of Home Appliance Manufacturers average operational conditions of 80°F/60% RH
FOR EXTENDED PERIOD RATES PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Framing Nailer
MIN-$20
DAY-$25
24HR-$30
The Paslode F350-S is ideal for professional framing work.
Fastener Specs: 2″ to 3-1/2″ 30° clipped and full-head paper-tape nails with .113″-.131″ diameters
Operating Pressure: 80-120 PSI
DAY-$35
24HR-$45
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT

Push Spreader 120lb
The Spyker Pro-Series S60-12020 Commercial Broadcast Spreader is the right walk-behind spreader for the
job. Its large 120 lb. poly hopper lets you cover more ground between fill-ups so you can get more done in
less time. Affectionately called the “Mulch-N-More” because of its extra-large single port opening, the
S60-12020 will work with larger materials such as pin mulch and rock salt.
The design of the S60-12020 enables it to project better spread coverage while maintaining perfect
equilibrium using the on-the-fly Accu-Way™ adjustment cable. The Accu-Way™ adjusts the material flow
forward or backward, which determines how quickly the granules launch off of the spinner/fan. This allows
the operator to maintain a perfectly balanced spread pattern regardless of the chosen material.
Features of Spyker Spreader S60-12020 (Mulch & More)
120 lb. (55kg) Poly Hopper Capacity
One-Piece Welded Stainless Steel Frame
5/8” Solid Stainless Steel Axle
13” x 5” Pneumatic Tires
Positive On/Off System – No Cables
Patented Split-shaft Design for Easy Calibration
Oversized Single-gate Opening
4HR-$15
DAY-$15
24HR-$20
THE MINIMUM RATE FOR THIS ITEM IS DAY
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Roofing Coil Nailer
DAY-$20
24HR-$30
Operating Pressure: 70 – 100 PSI
Fastener Specs: 3/4″ – 1 3/4″ 15° Wire weld coiled roofing nails.
Weight: 5.2 lbs
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT

Flooring Stapler, Pre-finished
DAY-$20
24HR-$25
The lightweight tongue-and-groove installation stapler drives perfect 45° angle staples every time and eliminates tongue splitting and floor surface damage. Adjusts to different floor thicknesses.
Flooring Thickness Range: .25″ – .50″
Fastener Specs: 3/16″ Crown 19 Gauge Medium Wire Staples
Operating Pressure: 70 – 120 PSI
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT

10×10 Hand Tamper
24HR-$10
Watch your toes!
FOR EXTENDED RATES PLEASE CONTACT EQUIPMENT RENTAL DEPARTMENT