Showing all 4 results

18 gal. Shop-Vac
18 gal. Shop-Vac

Shop-Vac® 18 Gallon* 6.5 Peak HP** Hardware Wet Dry Vac

Shop-Vac®Hardware Series Wet Dry Vacs
The Shop-Vac® 18 Gallon* 6.5 Peak HP** Wet Dry Utility Vac features the SVX2® Motor Technology†.
This new motor has more power and longer motor life when compared to the Shop-Vac® standard
6.5 Peak HP** motor. Use this vacuum to clean up your workspace, basement or garage. The hose
attaches to the rear blower port allowing you to blow the dirt out of hard to reach places.

Features
Cord Length: 18 Feet
Hose Size: 2.5″ Diameter
Warranty: 4 Years
Tank Drain
Lock-On® Hose
Blower Feature
Onboard Accessory Storage

Includes
Accessories
8-foot by 2.5-inch diameter Lock-On® hose
two 2.5-inch diameter extension wands
14-inch wet/dry floor nozzle

4HR-$15
DAY-$20
24HR-$25

ITEM IS SENT OUT FOR WET RENTAL.
IF DOING DRY, CUSTOMER MUST PURCHASE FILTER FOR ITEM
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Carpet Stapler
Carpet Stapler

Carpet Stapler – Electric
Electric Carpet Stapler, Features a powerful 11 amp solenoid that drives in hardwoods, Low overall height
that fits under stair risers, Jam-proof magazine holds 100 staples, 11 amps/115 volts, Case not included with
stapler

9/16″ STAPLES

4HR-$10
DAY-$12
24HR-$15

FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Flooring Stapler
Flooring Stapler

BOSTITCH MIIIFS 1-1/2-Inch to 2-Inch Pneumatic Floor Stapler

Made in USA
1-1/2-inch to 2-inch pneumatic flooring stapler for driving flooring staples. Staple Crown:0.5 inch
High-speed, mallet-actuated operation; extra-wide composite base; 420-inch-pounds of driving power
Constructed of aircraft-grade aluminum;-includes rubber-tipped mallet and foot kit
This stapler is ideal when working with ½-inch to 3/4-inch finished or unfinished hardwood flooring
15 by 3-1/8 by 3-1/4; 11.2-pounds

Product Description
Solid and engineered hardwood flooring installation. Durable aluminum housing. High-speed, mallet
actuated pneumatic operation increases productivity over manual methods. Extra-wide composite base
plates for added stability. Long reach handle for improved comfort and control.

Specs: Height 14.88′; Length: 17.25″; Width: 3.13″
Weight: 11.2 lbs
Driving Power: 420 Inch Lbs
Operating Pressure: 70 – 90 PSI
Thread Fitting Type: 3/8″ NPT
Magazine Capacity: 92 Staples.
Fastener Specifications: 1-1/2″ to 2″ 15-1/2GA Staples
Includes: Stapler; Graphite Mallet; Pre-Finished Flooring Adapter Foot & 1/2″ and 3/4″ Base Plates.

The Bostitch MIIIFS Pneumatic Floor Stapler lets you create professional-looking floors quickly and
comfortably. Its high-speed pneumatic operation rapidly drives staples into both unfinished and prefinished
hardwood flooring, and its long-grip handle allows you to maintain a comfortable posture when working.
Tackling prefinished flooring is no problem with the included adapter foot and the extra-wide base plates
that drive staples exactly where you want them.

All the Power You Need to Get Jobs Done Quickly
Harness the power of compressed air and complete your stapling jobs quickly and easily. Just connect the
Bostitch MIIIFS Pneumatic Floor Stapler to your air compressor for 420 in/lbs of impact at 70-120 PSI. A
manual strike will activate the firing action with a lightweight FloorGuard graphite mallet, and a 92-staple
magazine will keep you working without interruption.
Comfortable Design Keeps You in Control
Ergonomically designed for ease of use, the MIIIFS features an elongated handle that lets you work in a
natural, comfortable position. For control, the extra-wide 1/2- and 3/4-inch interchangeable base plates sit
flush against floor boards for stability, so you can drive staples at the proper depth every time. Additionally,
a pre-finished floorboard adapter foot won’t scuff or scratch floors during installation for a professional-
grade result every time.

Lightweight, Durable Construction for Everyday Use
The MIIIFS Pneumatic Floor Stapler’s lightweight body and graphite FloorGuard mallet make this tool comfortable enough to wield all day without fatigue. Built for durability, this stapler will withstand the wear and tear of any jobsite.

The Bostitch MIIFS Pneumatic Floor Stapler measures 3.13 x 14.8 x 17.25 inches (WxHxL) and weighs 11.2 pounds

4HR-$45
DAY-$45
24HR-$50

THE MINIMUM RATE FOR THIS ITEM IS DAY
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more
Pre-Finished Flooring Stapler
Pre-Finished Flooring Stapler

19GA SLS20-HF
3/16″ Crown, 1″ Hardwood & Laminate Floor Stapler

The lightweight tongue-and-groove installation stapler drives perfect 45° angle staples every time and
eliminates tongue splitting and floor surface damage. Adjusts to different floor thicknesses.

Applications
Hardwood Flooring
Features
Never-Lube® design. No oil required.
Front block easily adjusts to floor thickness.
Industry-exclusive safety controls staple placement.
Power adjusted motor drives staples to consistent and controllable depth.

Compatible Fasteners
Type: 19 Ga. 3/16″ Crown Medium Wire Staples
Gauge: 19
Range: 5/8″ – 1″

Specifications
Item #: 490021N
Tool Weight: 3.2 lbs (1.5 kgs)
Height: 9″ (228 mm)
Length: 13″ (332 mm)
Width: 3″ (76 mm)
Warranty: 5 year
Technology: Pneumatic
Trigger Type: Sequential Actuation
Operating Pressure: 70 – 120 (PSI)
Operating Pressure: 4.8 – 8.3 (Bar)
Air Inlet NPT: 1/4″
Capacity: 168
Crown: 3/16
Power Type: Pneumatic
Range: 5/8″ – 1″

4HR-$20
DAY-$20
24HR-$25

THE MINIMUM RATE FOR THIS ITEM IS DAY
FOR EXTENDED PERIOD RATES, PLEASE CONTACT OUR EQUIPMENT RENTAL DEPARTMENT

Read more